13Useful Remote Control Features
1
6
2
7
3
8
4 | 9 |
5
Mode switch (with “CBL/SAT” selected)
100
CBL/SAT control buttons
When the CBL/SAT function has been preset by the remote control’s learning function, the remote control buttons function as shown below.
•When the Mode switch is set to CBL/SAT, the cable converter or satellite broadcast tuner connected to the
display, use the buttons shown below to operate the device (3, 4, 5, 8 and 9 for cable converters and 1 to 7 for satellite tuners):
•Cable converters or satellite broadcast tuners made by other
manufacturers not listed in the system can be controlled using the remote control if buttons 1 to 9 have already learned the functions. See page 92.
1SAT MENU
Displays the satellite broadcasting menu screen
2ENTER, 
/
/
/
ENTER: Activates the selected function
/
/
/
: Selects items on the SAT GUIDE screen or SAT MENU screen
30 – 9
Press a button (or buttons) that corresponds to the channel that you want to watch
4CH +/–
Selects a higher or lower channel
5SOURCE
Turns the device sending the image On and Off
6SAT GUIDE
Displays the satellite broadcasting guide screen
• Set up this button with the learning function if necessary
7RETURN
When the CBL/SAT menu is displayed, restores the immediately previous screen
8CH ENTER*
Enters the selected channel with the direct channel selection buttons
9CH RETURN*
Switches between the current channel and the previous channel you were watching
*Some cable converter manufacturers do not preset CH ENTER and CH RETURN. Set up these buttons with the learning function if necessary.
NOTE
•CABLE and SAT cannot be selected at the same time.
•The
En