Pioneer PRO-1540HD, PRO-1140HD, PRO-940HD Code Message Check, Image or sound is interrupted or

Page 105

Appendix

14

Problem

Possible Solution

Home Media Gallery/PLAYBACK

 

 

 

• Image or sound is interrupted or

• Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable quality when

distorted (Block noise appears)

cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback quality and display

 

speed.

 

• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

 

• Check if the file complies to the supported format, bit rate or profile. Also check if the file is damaged.

 

• When connected by a wireless LAN, check if the bit rate is sufficient.

 

• Some files that comply with the supported format may not be played back or displayed.

 

 

• Cannot play or display

• Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable quality when

 

cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback quality and display

 

speed.

 

• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

 

• Check if the file complies to the supported format, bit rate or profile. Also check if the file is damaged.

 

• Check if the leasing contract for the server has expired.

 

• When connected by a wireless LAN, check if the bit rate is sufficient.

 

• Some files that comply with the supported format may not be played back or displayed.

 

• It takes time to capture and display a large-sized image. If this is the case, no operation may be performed.

 

• See the Pioneer website (www.pioneerelectronics.com) for the formats that are supported.

 

 

Home Media Gallery/FIRMWARE

 

 

 

• No updates are possible on USB

• Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged (power

 

unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files, and if the

 

speed of the device is sufficient (poor device speed may result in interrupted or delayed display of images

 

due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant, insert the

 

Flash Memory card into the multi-card reader.

 

• Confirm that the device is correctly inserted or removed.

 

• Check that the firmware file has been correctly downloaded. Also check the file size.

 

• See the Pioneer website (www.pioneerelectronics.com) for details.

 

 

Home Media Gallery/USB

 

 

 

•USB devices are not properly recognized • Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged (power unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files, and if the speed of the device is sufficient (poor device speed may result in interrupted or delayed display of images due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant, insert the Flash Memory card into the multi-card reader.

•Confirm that the device is correctly inserted or removed.

•No USB hub is supported. When you connect a home network, connect directly to the device’s USB port.

• Image or sound is interrupted or

• Verify that the file complies with the supported format, bit rate or profile. Also check the file for damage.

distorted (Block noise appears)

• Some files that comply with the supported format may not play back or display properly.

 

• Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged (power

 

unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files, and if the

 

speed of the device is sufficient (poor device speed may result in interrupted or delayed display of images

 

due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant, insert the

 

Flash Memory card into the multi-card reader.

 

 

English

If one of the following error codes appear on screen, check the corresponding message.

Code

Message

Check

SD04 and

Powering off. Internal temperature too high.

Check if the ambient temperature of the Plasma Display is high.

SD11

Check temperature around PDP.

 

 

 

 

SD05

(PRO-1540HD/PRO-1140HD)

 

 

Internal protection circuit turns power off.

Check the speaker cable connections between the Plasma Display and the speakers.

 

Is there a short in speaker cable?

 

 

(PRO-940HD)

 

 

Internal protection circuit turns power off.

Contact the nearest Pioneer Authorized Independent Service Company or the

 

 

Customer Support Division. (See back cover)

 

 

 

105

En

Page 104 Page 106
Image 105
Page 104 Page 106
Contents PRO-1540HDPRO-1140HDPRO-940HD Ventilation Caution For Canadian model Information to UserOperating Environment EnglishContents Contents Appendix Useful Remote Control FeaturesInstallation guidelines Important User Guidance InformationUsage guidelines Cleaning the cabinet When not using the product for a long timePlasma Display protection function CondensationImage Retention About the menu window size following video format switchPreventing damage from screen burning Panel sticking and after-image lagSafety Precautions When using the optional brackets or equivalent items Installation PrecautionsWhen using other items Rear view PRO-1540HDSupplied Accessories Plasma Display Part NamesFront/side view PRO-1540HD Ability to operate the TV Guide On Screen systemFront/side view PRO-1140HD Viewed from the front side of the display Side view Front/side view PRO-940HD Viewed from below of the display17 18 21 Terminals located on the upper edge of the compartment Rear view PRO-940HD 17 18 21 2024Favorite CH A, B, C, D Remote control unitPreparation Installing the Plasma DisplayMoving the Plasma Display LocationPreventing the Plasma Display from Falling Over Stabilizing on a table or floorMm min Attaching/detaching the Pioneer stand for PRO-940HD only Detaching the standReattaching the stand Switching between antenna a and B Connecting VHF/UHF antennas and a CableInserting the CableCARD Allowed operation range of the remote control unit Preparing the remote control unitBattery disposal Inserting batteriesWhen the speakers are installed on the sides Rear view Connecting the power cordRouting cables Plasma Display rear viewTurning on the power Turning off the powerBasic Operations Watching TV channels Selecting the antennaChanging channels Changing the volume and sound Volume + Volume adjustment display Muting displayChanging the language When receiving Stereo sound signals Setting MTS/SAP modeWhen receiving Mono + SAP sound signals When receiving Stereo + SAP sound signalsUsing the POD service Using the multiscreen functionsViewing a channel banner Splitting the screenUse the following procedure to capture and freeze one frame Freezing imagesPress Freeze System Setup Screens Setting up the TV Guide On Screen systemAbout the TV Guide On Screen system Welcome ScreenTV Guide On Screen System Setup Screen 12 VCR Code Testing Screen 9 VCR Configuration DiagramScreen 8 Is a VCR Connected? Screen 10 VCR Brand NameScreen 14 Confirming Your Settings Screen 15 CongratulationsScreen 16 Helpful Information Menu Configuration Menu SetupAV mode menus PC mode menusSetting up TV channels Tuner SetupParental Control Changing the passwordChecking the CableCARD ID Voluntary movie rating system MpaaSetting the TV ratings Clearing the passwordIf you forget the password Activating the Parental ControlCanadian rating systems Setting the TV Parental Guidelines TVBlocking Not Rated TV programs Canadian English ratingsSetting Canadian French ratings Setting Canadian English ratingsSetting new ratings Select Tuner Setup Then Enter Select Parental ControlTemporarily deactivating the Parental Control Deleting new ratingsAntenna a or antenna B Input 1Setting up closed captions Setting your favorite channelsActivating the closed caption Selecting the type of conventional closed captionsSelecting digital closed caption parameters Clock SettingSelect the desired parameter. / then Enter SelectionAuto Set Ant. a Xxxxxxxxxxxxxxxxxxxxx Monday TV Guide On Screen System Operation Using the TV Guide On Screen systemScreen components TV Guide On Screen iconsListings screen TV Guide On Screen navigationKey What it does Recording programs Setting program reminders When the recording is about to startWhile recording is in progress When scheduled reminder is due auto-tune is on When a scheduled reminder is due auto-tune is OFFPress a to make the Timer Alert screen disappear Searching by category Searching for programsTV Guide On Screen System Operation Alphabetical search Search Episode Options menuNavigation and search tips Schedule Options menu Scheduling recordings and remindersChanging setup options Changing the System SettingsChanging the Channel Display settings General default options Changing the Default OptionsRecord defaults Remind defaultsSleep Timer Adjustments and SettingsAV Selection For AV sourceSelect the desired level Basic picture adjustmentsFor PC source, the following screen appears Screen appears. Press / to select Yes then pressUsing PureCinema Advanced picture adjustmentsUsing Color Temp To adjust another item, press RETURN, then repeat steps 7Using Color Management Using CTIUsing Color Space Using Intelligent ColorEliminating noise from images Using the Dynamic Range Expander DRE functionsUsing the 3DYC and I-P Mode Sound adjustmentsAdjust the sound to your preference. See ModeNo Signal off AV mode only Power ControlPower Control provides convenient power saving options Front SurroundNo Operation off AV mode only Image position adjustment AV mode onlyPower Management PC mode only Select Option. / then Enter Select Auto Setup. / then EnterAV mode Manual image position and clock adjustments PC mode onlyPC mode except for XGA signals PC mode for XGA signalsSelecting a screen size for 43 aspect ratio signals PC mode except for XGA signals Dot bySelecting a screen size automatically Language setting About External Equipment Using External EquipmentWatching a DVD image Watching a VCR imageConnecting Hdmi equipment Using Hdmi InputHdmi equipment To specify the digital video signal type To specify the type of audio signalsRecording digital TV programs using a Using a game console or watching camcorder imagesConnecting a game console or camcorder Displaying an image of the game console or camcorderConnecting a recorder Connecting other audio equipmentConnecting an AV receiver Subwoofer AV receiverConnecting a personal computer Watching an image from a computerDisplaying an image from a PC When connecting the VCR Plasma Display rear view Computer compatibility chartLink connection Attaching the ferrite coreAbout SR+ Connecting control cablesSupported file formats Enjoying the Home Media GalleryMaking network connections Connecting a USB deviceRemoving a USB device Starting the Home Media Gallery functionReadable memory cards Readable data filesSelectable screen display Using the Tool MenuThumbnail screen Thumbnail List screenMedia Navigator Enjoying movie filesScreen Components My PlaylistMovie Player key guide Enter the desired time using buttons 0 toTime Search /Random Mode Repeat ModeSlow Playback Add to My PlaylistScreen Components Music Player key guide Enjoying music filesEnjoying photo files While playing content in the Playlist, press C to selectPhoto Player key guide Setting up the slideshowStarting the slideshow Setting up BGMRotating the image Repeating the slideshowSearch Other useful functionsSort Adding files to My PlaylistSetup Switching the server Other convenient features Resetting to defaultSoftware Update Screen saverAuto Connection Setup Message ProblemDialog Screen Message Glossary Learning function of the remote control unit Useful Remote Control FeaturesPresetting manufacturer codes to control other devices Presetting manufacturer codesManufacturing Reset Cable Programming codesVCR SEG PVR DVD-R Using the remote control unit to control other devices Mode switch with TV selectedReceiver control buttons CBL/SAT control buttons Mode switch with CBL/SAT selectedEnter CH +VCR control buttons Mode switch with VCR selectedDVD/DVR control buttons Troubleshooting Problem Possible SolutionAppendix 104 Image or sound is interrupted or Code Message CheckOriginal SSLeay License 107 Copyright c 1988-1997 Sam Leffler Giflib distribution is Copyright c 1997 Eric S. RaymondGNU General Public License Linux Source NoticePreamble Copyright c 1991-1997 Silicon Graphics, Inc110 How to Apply These Terms to Your New Programs No WarrantyGNU Lesser General Public License Modified work must itself be a software library 114 115 How to Apply These Terms to Your New Libraries Catv SpecificationsPRO-1140HD Unit mm inch Dimensions PRO-1540HD Unit mm inchImportant Notice about software upgrade from Pioneer Pioneer Corporation
Top Page Image Contents