TV Guide On Screen™ System Operation | 10 |
Changing setup options
You can change TV Guide On Screen™ settings from the Setup menu. Setup options are divided into three categories: System Settings, Channel Display, and Default Options.
1Select “SETUP” from the Service bar at the top of the screen.
2Press 
to select a Setup option.
Adjustment options appear with each highlighted menu item.
•System Settings – ZIP/postal code, cable setup, etc.
•Channel Display – Channel position, tuning channel, display on/off, etc.
•Default Options – General, recording and reminder defaults
Changing the System Settings
The System Settings include your ZIP/postal code and your cable TV setup.
1Highlight the “Change System Settings” item.
2Press ENTER to display the current settings and the
options to change them.
English
3Select one of the options, then follow the
•Yes, everything is correct (displays a helpful information screen). Press ENTER to quit the TV Guide On Screen™ System.
•Yes, but my channel lineup is incorrect (displays a screen with alternate channel lineups). Press ENTER to display the Channel Editor screen.
•No, repeat setup process (displays Screen 1 shown on page 32).
Changing the Channel Display settings
From the Channel Display settings you can set/change:
•the display setting to always display (On), never display (Off), or display only when channel information is available (Auto Hide)
•the tuned channel number
•the channel position in the channel listing
1Highlight the “Change Channel Display” item.
2Press ENTER to display the channel editor.
55
En