Pioneer PRO-920HD, PRO-1120HD manual Clearing the password, Activating the Parental Control

Page 34
Select “Password”. ( / then ENTER) Select “Clear Password”. ( / then ENTER)

09Tuner Setup

Clearing the password

Use the following procedure to clear the password.

1Press HOME MENU.

2 Select “Tuner Setup”. ( / then ENTER)

3Select “Parental Control”. (/then ENTER)

4

5

 

 

 

Parental Control

Password

 

 

 

 

 

Password

Change Password

 

xxxxxxxxxxxxxxxxxxxxx

 

 

 

Clear Password

 

xxxxxxxxxxxxxxxxxxxxx

 

 

 

 

 

 

xxxxxxxxxxxxxxxxxxxxx

 

 

 

 

 

 

 

 

 

 

 

 

 

Home Menu Exit

 

 

 

 

 

 

 

6Enter the current 4-digit password, using buttons 0 – 9.

• A confirmation screen appears.

7Press A.

8Press HOME MENU to exit the menu.

•The above procedure will reset the password to the factory default (1234).

Activating the Parental Control

1Press HOME MENU.

2 Select “Tuner Setup”. ( / then ENTER)

3Select “Parental Control”. (/then ENTER)

4

Select “Status”. (

/ then ENTER)

5

Select “On”. ( /

then ENTER)

•The password entry screen appears. Enter your 4-digit password using buttons 0 – 9.

6Press HOME MENU to exit the menu.

•If you select “Off” in step 5, then select “Reset on Startup” or “Don’t Reset”. With “Reset on Startup” selected, the Parental Control is automatically activated when the power to the system is turned off and on. With “Don’t Reset” selected, the Parental Control remains off when the power to the system is off and on.

Setting the voluntary movie rating system (MPAA)

1Press HOME MENU.

2 Select “Tuner Setup”. ( / then ENTER)

3Select “Parental Control”. (/then ENTER)

4

Select “MPAA Ratings”. (

/ then ENTER)

5

Select the desired rating and change the setting. ( /

 

then ENTER)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parental Control

MPAA Ratings

 

 

 

 

 

 

 

 

 

Blocked MPAA Ratings

xxxxxxxxxxxxxxxxxxxxx

 

 

 

 

 

MPAA Ratings

G

xxxxxxxxxxxxxxxxxxxxx

 

 

 

 

 

G, PG, PG-13, R, NC-17, Adult, NR

 

 

 

 

 

 

PG

xxxxxxxxxxxxxxxxxxxxx

 

 

 

 

 

 

 

 

 

 

 

 

 

PG-13

 

 

 

 

 

 

 

 

 

 

Home Menu Exit

 

 

 

 

 

 

 

 

 

•The password entry screen appears. Enter your 4-digit password using buttons 0 – 9.

•Each time you press ENTER, the setting is switched.

•A lock icon appears beside the blocked rating.

•All the ratings have been unblocked before shipment.

6Press HOME MENU to exit the menu.

•Blocking a rating causes more severe ratings to be automatically blocked as well. Likewise, unblocking a rating causes less severe ratings to be automatically unblocked.

We suggest you write down your password so you don’t forget it.

PRO-1120HD/PRO-920HD

Your password No.:

If you forget the password

When the message “Enter your Password” is displayed in step 6 under “Clearing the password”, press the ENTER button on the remote control unit and hold it down for 3 seconds or longer.

The password reverts to “1234”.

34

En

Page 33 Page 35
Image 34
Page 33 Page 35
Contents PRO-1120HDPRO-920HD Page For Canadian model Information to UserPRO-435PU Contents Useful Remote Control Features Adjustments and SettingsTimer Presetting Enjoying through External EquipmentImportant User Guidance Information Installation guidelinesUsage guidelines After-image lag image due to burning Panel sticking and after-image lagAfter-image lagging due to remaining electric load About operations through i.LINKSafety Precautions Rear view Installation PrecautionsWhen using other items Mounting holeOperational Precautions Plasma Display Supplied AccessoriesMedia Receiver Front view Right view Rear view Power buttonPart Names Front viewComponent Video Y, CB/PB, CR/PR Return Returns to the previous menu Remote control unitCH +/- Selects the channel Favorite CH A, B, C, DUsing the optional Pioneer speakers Operating Environment Installing the Plasma DisplayUsing the optional Pioneer stand PreparationPlasma Display Media Receiver Installing the Media ReceiverInstalling the Media Receiver vertically Insert the stand into the side of the Media ReceiverRemove the shock absorbing pads Plug the screw holes using the supplied capsShock absorbing pad Connecting the system cable That came with the speaker System cableAttaching speed clamps to the main unit When the speakers are installed on the sides Rear viewRouting cables Attaching and removing speed clampsAllowed operation range of the remote control unit Preparing the remote control unitInserting batteries VHF antenna UHF antenna Mixer Connecting VHF/UHF antennasConnecting VHF/UHF antennas and a Cable Converter Media Receiver rearSwitching between antenna a and B Inserting the cable cardConnecting the power cord Power cord Noise filterTurning off the power Standby Turning on the power StandbyBasic Operations Selecting the antenna Watching TV channelsChanging channels Viewing a channel banner Changing the volume and soundVolume adjustment Muting VOL + also quits mutingChanging the language Using the POD serviceSetting MTS/SAP mode Stereo broadcastsUsing the multiscreen functions Splitting the screenFreezing images Normal imageAV mode menus Menu SetupMenu configuration PC mode menusUsing Auto Channel Preset Tuner SetupSetting up TV channels Setting for skipping unwanted channelsChecking the Cable Card ID Checking signal strengthNaming TV channels Enabling data acquisitionVoluntary movie rating system Mpaa Changing the passwordParental Control TV ratingsUse the following procedure to clear the password Clearing the passwordSetting the voluntary movie rating system Mpaa Activating the Parental ControlSetting the TV Parental Guidelines TV Guidelines Setting the TV ratingsBlocking Not Rated TV programs Canadian English ratings Setting Canadian English ratingsCanadian rating systems Canadian French ratingsSetting Canadian French ratings Setting your favorite channelsSetting up closed captions Temporarily deactivating the Parental ControlSelecting digital closed captions Off Factory default On If MuteActivating the closed caption CaptionsClock Setting SelectionAV Selection Adjustments and SettingsSleep Timer For AV sourcePicture adjustments Pro AdjustYellow Color ManagementColor Temp CyanSound adjustments Front SurroundNo Operation off AV mode only Power ControlNo Signal off AV mode only Power Management PC mode onlyEnglish Dot PC mode for XGA signals AV modePC mode except for XGA signals Dot by PC mode except for XGA signalsAccording to the brightness of images Language settingSelect Option Then Enter Select Language Select a language Presetting TV programs using the timer Timer PresettingIcon Meaning Priority rules for overlapped presettings Watching a DVD image Watching a VCR imageConnecting Hdmi equipment Using Hdmi InputEnjoying through External Equipment Enjoying a game console or watching camcorder images Recording digital TV programs using a VCR or DVD recorderConnecting a game console or camcorder Displaying an image of the game console or camcorderConnecting an AV receiver Connecting other audio equipmentConnecting a recorder VCR or DVD recorderWatching a D-VHS image Useful and important notification PrecautionsDisplaying a D-VHS image Useful informationTo change the name of a device Setting up for controlling a D-VHS recorderEditing the i.LINK list To change the order of devicesOperating the control panel screen Setting up for i.LINK standbyStandby mode Link device Media Receiver i.LINK device No data relayWatching an image from a personal computer Computer compatibility chartConnecting a personal computer Displaying an image from a personal computerConnecting the VCR controller Screen for recording test appearsLists of controllable recording equipment manufactures ManufactureConnecting control cords About SR+Presetting manufacture codes Useful Remote Control FeaturesLearning function of the remote control unit Using the learning functionManufacture codes CABLE/SAT VCR DVD/DVRReceiver control buttons Using the remote control unit to control other devicesTurns the receiver power on and off Selects the input source connected to the receiverCable control buttons Mode switch with CBL/SAT selectedTurns the cable converter power on and off CH +SAT control buttons Turns the Satellite broadcast tuner power on and offEnter Mode switch with VCR selected VCR control buttonsDVD/DVR control buttons Appendix TroubleshootingProblem Possible Solution Code MessageAppendix Original SSLeay License Linux Source Notice GNU General Public License PreambleAppendix No Warranty How to Apply These Terms to Your New ProgramsGNU Lesser General Public License Appendix Appendix How to Apply These Terms to Your New Libraries Specifications Media Receiver, Model PRO-R05UTrademarks Copyright protectionPioneer Corporation
Top Page Image Contents