Pioneer PRO-920HD, PRO-1120HD manual Power Control, Energy Save, No Signal off AV mode only

Page 44

10Adjustments and Settings

Power Control

Power Control provides convenient functions for power saving.

Energy Save

You can save power consumption by decreasing the picture brightness. When you need not watch the screen and want to enjoy only audio, you can also deactivate the screen.

1Press HOME MENU.

2

Select “Power Control”. (

/

then ENTER)

3

Select “Energy Save”. (

/

then ENTER)

4

Select “Save” or

“Picture Off”. ( / then ENTER)

 

 

 

 

 

 

Item

Description

 

 

Standard

Does not decrease picture brightness.

 

 

(factory default)

 

 

 

 

 

 

 

 

 

Save

Decreases picture brightness to save power.

 

 

 

 

 

 

Picture Off

Deactivates the screen to save power. To

 

 

 

restore the screen display, press any button

 

 

 

other than VOL +/– and MUTING.

 

 

 

This setting is not memorized by the system.

 

 

 

 

 

 

5Press HOME MENU to exit the menu.

•You can also select this function using the Home menu when the input source is a PC.

No Signal off (AV mode only)

The system will be automatically placed into the standby mode if no signal is received for 15 minutes.

1Press HOME MENU.

2

Select “Power Control”. (

/

then ENTER)

3

Select “No Signal off”. (

/

then ENTER)

4

Select “Enable”. ( / then ENTER)

Item

Description

Disable

Does not place the system into the

(factory default) standby mode.

 

 

Enable

Places the system into the standby mode if

 

no signal is received for 15 minutes.

 

 

5Press HOME MENU to exit the menu.

•Five minutes before the system is placed into the standby mode, a message appears every minute.

•The system may not be placed into the standby mode when noise signals are present at the Media Receiver after a TV program finishes.

44

No Operation off (AV mode only)

The system will be automatically placed into the standby mode when no operation is performed for three hours.

1Press HOME MENU.

2

Select “Power Control”. ( /

then ENTER)

3

Select “No Operation off”. ( /

then ENTER)

4

Select “Enable”. ( / then ENTER)

Item

Description

Disable

Does not place the system into the

(factory default) standby mode.

 

 

Enable

Places the system into the standby mode if

 

no operation is performed for three hours.

 

 

5Press HOME MENU to exit the menu.

•Five minutes before the system is placed into the standby mode, a message appears every minute.

Power Management (PC mode only)

The system will be automatically placed into the standby mode when no signal is received from the personal computer.

1Press HOME MENU.

2

Select “Power Control”. ( / then ENTER)

3

Select “Power Management”. (

/

then ENTER)

4

Select “Mode1” or “Mode2”. (

/

then ENTER)

Item

Description

Off

No power management

(factory default)

 

 

 

Mode1

• Places the system into the standby mode

 

when no signal is received from the

 

personal computer for eight minutes.

 

• Even when you start using the computer

 

and a signal is received again, the system

 

stays off.

 

• The system is switched on again by

 

pressing STANDBY/ON on the Plasma

 

Display or TV on the remote control

 

unit.

 

 

Mode2

• Places the system into the standby mode

 

when no signal is received for eight

 

seconds.

 

• When you start using the computer and a

 

signal is received again, the system is

 

switched on.

 

• The system is switched on again by

 

pressing STANDBY/ON on the Plasma

 

Display or TV on the remote control

 

unit.

 

 

5Press HOME MENU to exit the menu.

En

Page 43 Page 45
Image 44
Page 43 Page 45
Contents PRO-1120HDPRO-920HD Page PRO-435PU Information to UserFor Canadian model Contents Adjustments and Settings Timer PresettingUseful Remote Control Features Enjoying through External EquipmentUsage guidelines Installation guidelinesImportant User Guidance Information Panel sticking and after-image lag After-image lagging due to remaining electric loadAfter-image lag image due to burning About operations through i.LINKSafety Precautions Installation Precautions When using other itemsRear view Mounting holeOperational Precautions Media Receiver Supplied AccessoriesPlasma Display Power button Part NamesFront view Right view Rear view Front viewComponent Video Y, CB/PB, CR/PR Remote control unit CH +/- Selects the channelReturn Returns to the previous menu Favorite CH A, B, C, DInstalling the Plasma Display Using the optional Pioneer standUsing the optional Pioneer speakers Operating Environment PreparationInstalling the Media Receiver Installing the Media Receiver verticallyPlasma Display Media Receiver Insert the stand into the side of the Media ReceiverShock absorbing pad Plug the screw holes using the supplied capsRemove the shock absorbing pads Connecting the system cable That came with the speaker System cableWhen the speakers are installed on the sides Rear view Routing cablesAttaching speed clamps to the main unit Attaching and removing speed clampsInserting batteries Preparing the remote control unitAllowed operation range of the remote control unit Connecting VHF/UHF antennas Connecting VHF/UHF antennas and a Cable ConverterVHF antenna UHF antenna Mixer Media Receiver rearSwitching between antenna a and B Inserting the cable cardConnecting the power cord Power cord Noise filterBasic Operations Turning on the power StandbyTurning off the power Standby Changing channels Watching TV channelsSelecting the antenna Changing the volume and sound Volume adjustment MutingViewing a channel banner VOL + also quits mutingUsing the POD service Setting MTS/SAP modeChanging the language Stereo broadcastsUsing the multiscreen functions Splitting the screenFreezing images Normal imageMenu Setup Menu configurationAV mode menus PC mode menusTuner Setup Setting up TV channelsUsing Auto Channel Preset Setting for skipping unwanted channelsChecking signal strength Naming TV channelsChecking the Cable Card ID Enabling data acquisitionChanging the password Parental ControlVoluntary movie rating system Mpaa TV ratingsClearing the password Setting the voluntary movie rating system MpaaUse the following procedure to clear the password Activating the Parental ControlBlocking Not Rated TV programs Setting the TV ratingsSetting the TV Parental Guidelines TV Guidelines Setting Canadian English ratings Canadian rating systemsCanadian English ratings Canadian French ratingsSetting your favorite channels Setting up closed captionsSetting Canadian French ratings Temporarily deactivating the Parental ControlOff Factory default On If Mute Activating the closed captionSelecting digital closed captions CaptionsClock Setting SelectionAdjustments and Settings Sleep TimerAV Selection For AV sourcePicture adjustments Pro AdjustColor Management Color TempYellow CyanSound adjustments Front SurroundPower Control No Signal off AV mode onlyNo Operation off AV mode only Power Management PC mode onlyEnglish AV mode PC mode except for XGA signals Dot byDot PC mode for XGA signals PC mode except for XGA signalsSelect Option Then Enter Select Language Select a language Language settingAccording to the brightness of images Icon Meaning Timer PresettingPresetting TV programs using the timer Priority rules for overlapped presettings Watching a DVD image Watching a VCR imageEnjoying through External Equipment Using Hdmi InputConnecting Hdmi equipment Recording digital TV programs using a VCR or DVD recorder Connecting a game console or camcorderEnjoying a game console or watching camcorder images Displaying an image of the game console or camcorderConnecting other audio equipment Connecting a recorderConnecting an AV receiver VCR or DVD recorderWatching a D-VHS image Precautions Displaying a D-VHS imageUseful and important notification Useful informationSetting up for controlling a D-VHS recorder Editing the i.LINK listTo change the name of a device To change the order of devicesSetting up for i.LINK standby Standby mode Link device Media Receiver i.LINK deviceOperating the control panel screen No data relayComputer compatibility chart Connecting a personal computerWatching an image from a personal computer Displaying an image from a personal computerConnecting the VCR controller Screen for recording test appearsLists of controllable recording equipment manufactures ManufactureConnecting control cords About SR+Useful Remote Control Features Learning function of the remote control unitPresetting manufacture codes Using the learning functionManufacture codes CABLE/SAT VCR DVD/DVRUsing the remote control unit to control other devices Turns the receiver power on and offReceiver control buttons Selects the input source connected to the receiverMode switch with CBL/SAT selected Turns the cable converter power on and offCable control buttons CH +Enter Turns the Satellite broadcast tuner power on and offSAT control buttons Mode switch with VCR selected VCR control buttonsDVD/DVR control buttons Troubleshooting Problem Possible SolutionAppendix Code MessageAppendix Original SSLeay License Linux Source Notice GNU General Public License PreambleAppendix No Warranty How to Apply These Terms to Your New ProgramsGNU Lesser General Public License Appendix Appendix How to Apply These Terms to Your New Libraries Specifications Media Receiver, Model PRO-R05UTrademarks Copyright protectionPioneer Corporation
Top Page Image Contents