Pioneer PRO-920HD, PRO-1120HD Adjustments and Settings, Sleep Timer, AV Selection, For AV source

Page 40

10Adjustments and Settings

Sleep Timer

When the selected time elapses, the Sleep Timer automatically places the system into the standby mode.

Press SLEEP to select the desired time.

The timer starts counting.

Each time you press SLEEP, the selection is switched as below:

30 60 90

(cancel) Off

 

120

(minutes)

 

The factory default is “Off”.

To cancel the Sleep Timer, select “Off” by pressing SLEEP.

Five minutes before the selected time elapses, the remaining time appears every minute.

You can also use the menu to set the Sleep Timer.

1Press HOME MENU.

2Select “Sleep Timer”. (/ then ENTER)

3Select the desired time. (/ then ENTER)

4Press HOME MENU to exit the menu.

AV Selection

Select from the five viewing options, depending on the current environment (e.g., room brightness), the type of the current TV program, or the type of images input from external equipment.

1Press AV SELECTION.

The current AV Selection mode appears.

2Press AV SELECTION again before the displayed mode disappears.

For AV source, the mode is switched in the order; STANDARD, DYNAMIC, MOVIE, GAME, then USER.

For PC source, the mode is switched between STANDARD and USER.

40

You can also use the menu to change the options.

1Press HOME MENU.

2Select “Picture”. (/ then ENTER)

3Select “AV Selection”. (/ then ENTER)

4Select the desired option. (/ then ENTER)

AV Selection

STANDARD

DYNAMIC

MOVIE

GAME

USER

For AV source

ItemDescription

STANDARD For a highly defined image in a normally bright room

DYNAMIC

For a very sharp image with the maximum

 

contrast

 

This mode does not allow manual image

 

quality adjustment.

 

 

MOVIE

For a movie

 

 

GAME

Lowers image brightness for easier viewing.

 

 

USER

Allows the user to customize settings as

 

desired. You can set the mode for each input

 

source.

 

 

For PC source

ItemDescription

STANDARD For a highly defined image in a normally (factory default) bright room

USER

Allows the user to customize settings as

 

desired. You can set the mode for each input

 

source.

 

 

5Press HOME MENU to exit the menu.

En

Image 40
Contents PRO-1120HDPRO-920HD Page For Canadian model Information to UserPRO-435PU Contents Adjustments and Settings Timer PresettingUseful Remote Control Features Enjoying through External EquipmentImportant User Guidance Information Installation guidelinesUsage guidelines Panel sticking and after-image lag After-image lagging due to remaining electric loadAfter-image lag image due to burning About operations through i.LINKSafety Precautions Installation Precautions When using other itemsRear view Mounting holeOperational Precautions Plasma Display Supplied AccessoriesMedia Receiver Power button Part NamesFront view Right view Rear view Front viewComponent Video Y, CB/PB, CR/PR Remote control unit CH +/- Selects the channelReturn Returns to the previous menu Favorite CH A, B, C, DInstalling the Plasma Display Using the optional Pioneer standUsing the optional Pioneer speakers Operating Environment PreparationInstalling the Media Receiver Installing the Media Receiver verticallyPlasma Display Media Receiver Insert the stand into the side of the Media ReceiverRemove the shock absorbing pads Plug the screw holes using the supplied capsShock absorbing pad Connecting the system cable That came with the speaker System cableWhen the speakers are installed on the sides Rear view Routing cablesAttaching speed clamps to the main unit Attaching and removing speed clampsAllowed operation range of the remote control unit Preparing the remote control unitInserting batteries Connecting VHF/UHF antennas Connecting VHF/UHF antennas and a Cable ConverterVHF antenna UHF antenna Mixer Media Receiver rearSwitching between antenna a and B Inserting the cable cardConnecting the power cord Power cord Noise filterTurning off the power Standby Turning on the power StandbyBasic Operations Selecting the antenna Watching TV channelsChanging channels Changing the volume and sound Volume adjustment MutingViewing a channel banner VOL + also quits mutingUsing the POD service Setting MTS/SAP modeChanging the language Stereo broadcastsUsing the multiscreen functions Splitting the screenFreezing images Normal imageMenu Setup Menu configurationAV mode menus PC mode menusTuner Setup Setting up TV channelsUsing Auto Channel Preset Setting for skipping unwanted channelsChecking signal strength Naming TV channelsChecking the Cable Card ID Enabling data acquisitionChanging the password Parental ControlVoluntary movie rating system Mpaa TV ratingsClearing the password Setting the voluntary movie rating system MpaaUse the following procedure to clear the password Activating the Parental ControlSetting the TV Parental Guidelines TV Guidelines Setting the TV ratingsBlocking Not Rated TV programs Setting Canadian English ratings Canadian rating systemsCanadian English ratings Canadian French ratings Setting your favorite channels Setting up closed captions Setting Canadian French ratings Temporarily deactivating the Parental ControlOff Factory default On If Mute Activating the closed captionSelecting digital closed captions CaptionsClock Setting SelectionAdjustments and Settings Sleep TimerAV Selection For AV sourcePicture adjustments Pro AdjustColor Management Color TempYellow CyanSound adjustments Front SurroundPower Control No Signal off AV mode onlyNo Operation off AV mode only Power Management PC mode onlyEnglish AV mode PC mode except for XGA signals Dot byDot PC mode for XGA signals PC mode except for XGA signalsAccording to the brightness of images Language settingSelect Option Then Enter Select Language Select a language Presetting TV programs using the timer Timer PresettingIcon Meaning Priority rules for overlapped presettings Watching a DVD image Watching a VCR imageConnecting Hdmi equipment Using Hdmi InputEnjoying through External Equipment Recording digital TV programs using a VCR or DVD recorder Connecting a game console or camcorderEnjoying a game console or watching camcorder images Displaying an image of the game console or camcorderConnecting other audio equipment Connecting a recorderConnecting an AV receiver VCR or DVD recorderWatching a D-VHS image Precautions Displaying a D-VHS imageUseful and important notification Useful informationSetting up for controlling a D-VHS recorder Editing the i.LINK listTo change the name of a device To change the order of devicesSetting up for i.LINK standby Standby mode Link device Media Receiver i.LINK deviceOperating the control panel screen No data relayComputer compatibility chart Connecting a personal computerWatching an image from a personal computer Displaying an image from a personal computerConnecting the VCR controller Screen for recording test appearsLists of controllable recording equipment manufactures ManufactureConnecting control cords About SR+Useful Remote Control Features Learning function of the remote control unitPresetting manufacture codes Using the learning functionManufacture codes CABLE/SAT VCR DVD/DVRUsing the remote control unit to control other devices Turns the receiver power on and offReceiver control buttons Selects the input source connected to the receiverMode switch with CBL/SAT selected Turns the cable converter power on and offCable control buttons CH +SAT control buttons Turns the Satellite broadcast tuner power on and offEnter Mode switch with VCR selected VCR control buttonsDVD/DVR control buttons Troubleshooting Problem Possible SolutionAppendix Code MessageAppendix Original SSLeay License Linux Source Notice GNU General Public License PreambleAppendix No Warranty How to Apply These Terms to Your New ProgramsGNU Lesser General Public License Appendix Appendix How to Apply These Terms to Your New Libraries Specifications Media Receiver, Model PRO-R05UTrademarks Copyright protectionPioneer Corporation