Pioneer PRO-1120HD manual Displaying a D-VHS image, Useful and important notification, Precautions

Page 55

Enjoying through External Equipment

12

Using i.LINK cables you can also connect up to two D-VHS recorders in a daisy chain.

i.LINK cable

Media Receiver

 

D-VHS recorder

 

 

 

 

 

 

 

 

 

 

 

 

D-VHS recorder

Precautions about i.LINK connections

•Use S400 i.LINK cables that have 4-pin plugs and are shorter than 3.5 m (11.48 feet).

•Some i.LINK devices cannot relay data when their power is off.

•Do not make the following loop connections:

Media Receiver

D-VHS recorder

 

 

 

 

 

D-VHS recorder

Media Receiver

 

 

D-VHS recorder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Displaying a D-VHS image

To watch a D-VHS image, press i.LINK on the remote control unit or press INPUT on the Plasma Display to select i.LINK.

Useful and important notification

Useful information

•D-VHS recorders connected through i.LINK can play back digital TV programs recorded using this system.

•D-VHS recorders connected through i.LINK can record only digital TV programs. Using i.LINK, those recorders cannot record conventional TV channels nor contents coming from external input sources.

•This system can be simultaneously connected with up to two D-VHS recorders that support i.LINK. You can control one of these D-VHS recorders (basic functions only).

•Some D-VHS recorders connected through i.LINK may not allow this system to control through the control panel screen or to display images and output sound.

•To record digital TV programs using connected D-VHS recorders, use D-VHS tape. You cannot use VHS tape nor S-VHS tape.

•Some D-VHS recorders connected though i.LINK may not allow this system to play back images and sound recorded on VHS tape, S-VHS tape, or (if with analog signals) D-VHS tape. If this is the case, connect the analog output terminals on the D-VHS recorder to INPUT 1, 2, 3, or 4 terminals on this system. See page 50.

•This system supports the Digital Transmission Content Protection (DTCP) technology. The DTCP is a copy protection technology that presents data coding and device authentication.

•i.LINK may not allow copy-restricted video, audio, and other data to be copied from one i.LINK device to another. It also may not allow video, audio, and other data to be transferred with equipment that does not support the DTCP.

English

Precautions

•While one D-VHS recorder connected through i.LINK is recording or playing back, do not switch on or off the other connected D-VHS recorder (not in use) or do not connect or disconnect the i.LINK cable from that D-VHS recorder. Doing so can result in image and sound interruption.

•Some D-VHS recorders that support i.LINK cannot relay data when their power is off. Check the instruction manual that came with your D-VHS recorder. This system allows you to change the setting for data relay in the standby mode. See “Setting up for i.LINK standby” on page 57.

55

En

Page 54 Page 56
Image 55
Page 54 Page 56
Contents PRO-1120HDPRO-920HD Page For Canadian model Information to UserPRO-435PU Contents Enjoying through External Equipment Adjustments and SettingsTimer Presetting Useful Remote Control FeaturesImportant User Guidance Information Installation guidelinesUsage guidelines About operations through i.LINK Panel sticking and after-image lagAfter-image lagging due to remaining electric load After-image lag image due to burningSafety Precautions Mounting hole Installation PrecautionsWhen using other items Rear viewOperational Precautions Plasma Display Supplied AccessoriesMedia Receiver Front view Power buttonPart Names Front view Right view Rear viewComponent Video Y, CB/PB, CR/PR Favorite CH A, B, C, D Remote control unitCH +/- Selects the channel Return Returns to the previous menuPreparation Installing the Plasma DisplayUsing the optional Pioneer stand Using the optional Pioneer speakers Operating EnvironmentInsert the stand into the side of the Media Receiver Installing the Media ReceiverInstalling the Media Receiver vertically Plasma Display Media ReceiverRemove the shock absorbing pads Plug the screw holes using the supplied capsShock absorbing pad That came with the speaker System cable Connecting the system cableAttaching and removing speed clamps When the speakers are installed on the sides Rear viewRouting cables Attaching speed clamps to the main unitAllowed operation range of the remote control unit Preparing the remote control unitInserting batteries Media Receiver rear Connecting VHF/UHF antennasConnecting VHF/UHF antennas and a Cable Converter VHF antenna UHF antenna MixerInserting the cable card Switching between antenna a and BPower cord Noise filter Connecting the power cordTurning off the power Standby Turning on the power StandbyBasic Operations Selecting the antenna Watching TV channelsChanging channels VOL + also quits muting Changing the volume and soundVolume adjustment Muting Viewing a channel bannerStereo broadcasts Using the POD serviceSetting MTS/SAP mode Changing the languageSplitting the screen Using the multiscreen functionsNormal image Freezing imagesPC mode menus Menu SetupMenu configuration AV mode menusSetting for skipping unwanted channels Tuner SetupSetting up TV channels Using Auto Channel PresetEnabling data acquisition Checking signal strengthNaming TV channels Checking the Cable Card IDTV ratings Changing the passwordParental Control Voluntary movie rating system MpaaActivating the Parental Control Clearing the passwordSetting the voluntary movie rating system Mpaa Use the following procedure to clear the passwordSetting the TV Parental Guidelines TV Guidelines Setting the TV ratingsBlocking Not Rated TV programs Canadian French ratings Setting Canadian English ratingsCanadian rating systems Canadian English ratingsTemporarily deactivating the Parental Control Setting your favorite channelsSetting up closed captions Setting Canadian French ratingsCaptions Off Factory default On If MuteActivating the closed caption Selecting digital closed captionsSelection Clock SettingFor AV source Adjustments and SettingsSleep Timer AV SelectionPro Adjust Picture adjustmentsCyan Color ManagementColor Temp YellowFront Surround Sound adjustmentsPower Management PC mode only Power ControlNo Signal off AV mode only No Operation off AV mode onlyEnglish PC mode except for XGA signals AV modePC mode except for XGA signals Dot by Dot PC mode for XGA signalsAccording to the brightness of images Language settingSelect Option Then Enter Select Language Select a language Presetting TV programs using the timer Timer PresettingIcon Meaning Priority rules for overlapped presettings Watching a VCR image Watching a DVD imageConnecting Hdmi equipment Using Hdmi InputEnjoying through External Equipment Displaying an image of the game console or camcorder Recording digital TV programs using a VCR or DVD recorderConnecting a game console or camcorder Enjoying a game console or watching camcorder imagesVCR or DVD recorder Connecting other audio equipmentConnecting a recorder Connecting an AV receiverWatching a D-VHS image Useful information PrecautionsDisplaying a D-VHS image Useful and important notificationTo change the order of devices Setting up for controlling a D-VHS recorderEditing the i.LINK list To change the name of a deviceNo data relay Setting up for i.LINK standbyStandby mode Link device Media Receiver i.LINK device Operating the control panel screenDisplaying an image from a personal computer Computer compatibility chartConnecting a personal computer Watching an image from a personal computerScreen for recording test appears Connecting the VCR controllerManufacture Lists of controllable recording equipment manufacturesAbout SR+ Connecting control cordsUsing the learning function Useful Remote Control FeaturesLearning function of the remote control unit Presetting manufacture codesCABLE/SAT VCR DVD/DVR Manufacture codesSelects the input source connected to the receiver Using the remote control unit to control other devicesTurns the receiver power on and off Receiver control buttonsCH + Mode switch with CBL/SAT selectedTurns the cable converter power on and off Cable control buttonsSAT control buttons Turns the Satellite broadcast tuner power on and offEnter VCR control buttons Mode switch with VCR selectedDVD/DVR control buttons Code Message TroubleshootingProblem Possible Solution AppendixAppendix Original SSLeay License Preamble Linux Source Notice GNU General Public LicenseAppendix How to Apply These Terms to Your New Programs No WarrantyGNU Lesser General Public License Appendix Appendix How to Apply These Terms to Your New Libraries Media Receiver, Model PRO-R05U SpecificationsCopyright protection TrademarksPioneer Corporation
Top Page Image Contents