Pioneer PRO 1140HD, PRO 940HD manual Code Message Check, Image or sound is interrupted or

Page 103

Appendix

14

Problem

Possible Solution

Home Media Gallery/PLAYBACK

 

 

 

• Image or sound is interrupted or

• Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable quality when

distorted (Block noise appears)

cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback quality and display

 

speed.

 

• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

 

• Check if the file complies to the supported format, bit rate or profile. Also check if the file is damaged.

 

• When connected by a wireless LAN, check if the bit rate is sufficient.

 

• Some files that comply with the supported format may not be played back or displayed.

 

 

• Cannot play or display

• Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable quality when

 

cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback quality and display

 

speed.

 

• Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.

 

• Check if the file complies to the supported format, bit rate or profile. Also check if the file is damaged.

 

• Check if the leasing contract for the server has expired.

 

• When connected by a wireless LAN, check if the bit rate is sufficient.

 

• Some files that comply with the supported format may not be played back or displayed.

 

• It takes time to capture and display a large-sized image. If this is the case, no operation may be performed.

 

• See the Pioneer website (www.pioneerelectronics.com) for the formats that are supported.

 

 

Home Media Gallery/FIRMWARE

 

 

 

• No updates are possible on USB

• Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged (power

 

unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files, and if the

 

speed of the device is sufficient (poor device speed may result in interrupted or delayed display of images

 

due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant, insert the

 

Flash Memory card into the multi-card reader.

 

• Confirm that the device is correctly inserted or removed.

 

• Check that the firmware file has been correctly downloaded. Also check the file size.

 

• See the Pioneer website (www.pioneerelectronics.com) for details.

 

 

Home Media Gallery/USB

 

 

 

•USB devices are not properly recognized • Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged (power unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files, and if the speed of the device is sufficient (poor device speed may result in interrupted or delayed display of images due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant, insert the Flash Memory card into the multi-card reader.

•Confirm that the device is correctly inserted or removed.

•No USB hub is supported. When you connect a home network, connect directly to the device’s USB port.

• Image or sound is interrupted or

• Verify that the file complies with the supported format, bit rate or profile. Also check the file for damage.

distorted (Block noise appears)

• Some files that comply with the supported format may not play back or display properly.

 

• Check if the device is Mass Storage Class compliant, if it is connected properly, nothing is damaged (power

 

unit, mode such as Mass Storage mode and media format, etc.), if it contains the supported files, and if the

 

speed of the device is sufficient (poor device speed may result in interrupted or delayed display of images

 

due to a bit-rate problem). When using a digital camera that is not Mass Storage Class compliant, insert the

 

Flash Memory card into the multi-card reader.

 

 

English

If one of the following error codes appear on screen, check the corresponding message.

Code

Message

Check

SD04 and

Powering off. Internal temperature too high.

Check if the ambient temperature of the Plasma Display is high.

SD11

Check temperature around PDP.

 

 

 

 

SD05

(PRO-1140HD)

 

 

Internal protection circuit turns power off.

Check the speaker cable connections between the Plasma Display and the speakers.

 

Is there a short in speaker cable?

 

 

(PRO-940HD)

 

 

Internal protection circuit turns power off.

Contact the nearest Pioneer Authorized Independent Service Company or the

 

 

Customer Support Division. (See back cover)

 

 

 

103

En

Page 102 Page 104
Image 103
Page 102 Page 104
Contents PRO-1140HDPRO-940HD Ventilation Caution English Information to UserFor Canadian model Operating EnvironmentContents Contents Appendix Useful Remote Control FeaturesImportant User Guidance Information Installation guidelinesUsage guidelines Condensation When not using the product for a long timeCleaning the cabinet Plasma Display protection functionPanel sticking and after-image lag About the menu window size following video format switchImage Retention Preventing damage from screen burningSafety Precautions Rear view PRO-1140HD Installation PrecautionsWhen using the optional brackets or equivalent items When using other itemsPower cord 2 m/6.6 feet Cleaning cloth Supplied AccessoriesRemote control unit AA size battery x Hexagonal wrench x Ability to operate the TV Guide On Screen system Part NamesPlasma Display Front/side view PRO-1140HDViewed from the front side of the display Side view Front/side view PRO-940HD Viewed from below of the displayTerminals located on the upper edge of the compartment 17 18 2117 18 21 2024 Favorite CH A, B, C, D Remote control unitPreparation Installing the Plasma DisplayMoving the Plasma Display Stabilizing on a table or floor Preventing the Plasma Display from Falling OverMm min Detaching the stand Attaching/detaching the Pioneer stand for PRO-940HD onlyReattaching the stand Connecting VHF/UHF antennas and a Cable Switching between antenna a and BInserting the CableCARD Inserting batteries Preparing the remote control unitAllowed operation range of the remote control unit Battery disposalRouting cables Connecting the power cordTurning off the power Turning on the powerBasic Operations Selecting the antenna Watching TV channelsChanging channels Volume + Volume adjustment display Muting display Changing the volume and soundChanging the language When receiving Stereo + SAP sound signals Setting MTS/SAP modeWhen receiving Stereo sound signals When receiving Mono + SAP sound signalsSplitting the screen Using the multiscreen functionsUsing the POD service Viewing a channel bannerFreezing images Use the following procedure to capture and freeze one frameMoving image Welcome Screen Setting up the TV Guide On Screen systemSystem Setup Screens About the TV Guide On Screen systemTV Guide On Screen System Setup Screen 10 VCR Brand Name Screen 9 VCR Configuration DiagramScreen 12 VCR Code Testing Screen 8 Is a VCR Connected?Screen 15 Congratulations Screen 14 Confirming Your SettingsScreen 16 Helpful Information PC mode menus Menu SetupMenu Configuration AV mode menusSetting up TV channels Tuner SetupVoluntary movie rating system Mpaa Changing the passwordParental Control Checking the CableCARD IDIf you forget the password Clearing the passwordSetting the voluntary movie rating system Mpaa Setting the TV ratingsCanadian English ratings Setting the TV Parental Guidelines TVCanadian rating systems Blocking Not Rated TV programsSelect Tuner Setup Then Enter Select Parental Control Setting Canadian English ratingsSetting Canadian French ratings Setting new ratingsInput 1 Deleting new ratingsTemporarily deactivating the Parental Control Antenna a or antenna BSelecting the type of conventional closed captions Setting your favorite channelsSetting up closed captions Activating the closed captionSelect the desired parameter. / then Enter Clock SettingSelecting digital closed captions Selecting digital closed caption parametersAuto Set Ant. a Xxxxxxxxxxxxxxxxxxxxx Monday TV Guide On Screen icons Using the TV Guide On Screen systemTV Guide On Screen System Operation Screen componentsTV Guide On Screen navigation Listings screenKey What it does Recording programs When the recording is about to start Setting program remindersWhile recording is in progress When a scheduled reminder is due auto-tune is OFF When scheduled reminder is due auto-tune is onPress a to make the Timer Alert screen disappear Searching by category Searching for programsTV Guide On Screen System Operation Search Episode Options menu Alphabetical searchNavigation and search tips Schedule Options menu Scheduling recordings and remindersChanging the System Settings Changing setup optionsChanging the Channel Display settings Remind defaults Changing the Default OptionsGeneral default options Record defaultsFor AV source Adjustments and SettingsSleep Timer AV SelectionScreen appears. Press / to select Yes then press Basic picture adjustmentsSelect the desired level For PC source, the following screen appearsTo adjust another item, press RETURN, then repeat steps 7 Advanced picture adjustmentsUsing PureCinema Using Color TempUsing Intelligent Color Using CTIUsing Color Management Using Color SpaceEliminating noise from images Using the Dynamic Range Expander DRE functionsMode Sound adjustmentsUsing the 3DYC and I-P Mode Adjust the sound to your preference. SeeFront Surround Power ControlNo Signal off AV mode only Power Control provides convenient power saving optionsSelect Option. / then Enter Select Auto Setup. / then Enter Image position adjustment AV mode onlyNo Operation off AV mode only Power Management PC mode onlyPC mode for XGA signals Manual image position and clock adjustments PC mode onlyAV mode PC mode except for XGA signalsPC mode except for XGA signals Dot by Selecting a screen size for 43 aspect ratio signalsSelecting a screen size automatically Language setting Watching a VCR image Using External EquipmentAbout External Equipment Watching a DVD imageTo specify the type of audio signals Using Hdmi InputConnecting Hdmi equipment Hdmi equipment To specify the digital video signal typeDisplaying an image of the game console or camcorder Using a game console or watching camcorder imagesRecording digital TV programs using a Connecting a game console or camcorderSubwoofer AV receiver Connecting other audio equipmentConnecting a recorder Connecting an AV receiverWatching an image from a computer Connecting a personal computerDisplaying an image from a PC Attaching the ferrite core Computer compatibility chartWhen connecting the VCR Plasma Display rear view Link connectionAbout SR+ Connecting control cablesSupported file formats Enjoying the Home Media GalleryMaking network connections Connecting a USB deviceRemoving a USB device Starting the Home Media Gallery functionReadable memory cards Readable data filesThumbnail List screen Using the Tool MenuSelectable screen display Thumbnail screenMy Playlist Enjoying movie filesMedia Navigator Screen Components/ Enter the desired time using buttons 0 toMovie Player key guide Time SearchAdd to My Playlist Repeat ModeRandom Mode Slow PlaybackScreen Components Music Player key guide Enjoying music filesEnjoying photo files While playing content in the Playlist, press C to selectSelect OK / then Enter Slideshow setup finishes Setting up the slideshowPhoto Player key guide Repeating the slideshow Setting up BGMStarting the slideshow Rotating the imageAdding files to My Playlist Other useful functionsSearch SortSetup Switching the server Screen saver Resetting to defaultOther convenient features Software UpdateMessage Problem Auto Connection SetupDialog Screen Message Glossary Presetting manufacturer codes Useful Remote Control FeaturesLearning function of the remote control unit Presetting manufacturer codes to control other devicesManufacturing Reset Cable Programming codesVCR SEG PVR DVD-R Mode switch with TV selected Using the remote control unit to control other devicesReceiver control buttons CH + Mode switch with CBL/SAT selectedCBL/SAT control buttons EnterVCR control buttons Mode switch with VCR selectedDVD/DVR control buttons Problem Possible Solution TroubleshootingAppendix 102 Image or sound is interrupted or Code Message CheckOriginal SSLeay License 105 Copyright c 1988-1997 Sam Leffler Giflib distribution is Copyright c 1997 Eric S. RaymondCopyright c 1991-1997 Silicon Graphics, Inc Linux Source NoticeGNU General Public License Preamble108 How to Apply These Terms to Your New Programs No WarrantyGNU Lesser General Public License Modified work must itself be a software library 112 113 How to Apply These Terms to Your New Libraries Plasma Display Model PRO-1140HD Model PRO-940HD SpecificationsDimensions PRO-1140HD Unit mm inch Important Notice about software upgrade from Pioneer Pioneer Corporation
Top Page Image Contents