Pioneer PRO 940HD manual Image position adjustment AV mode only, No Operation off AV mode only

Page 62

11Adjustments and Settings

No Operation off (AV mode only)

The system automatically enters Standby when no operation is performed for three hours.

1Press HOME MENU.

2Select “Power Control”. (/ then ENTER)

3Select “No Operation off”. (/ then ENTER)

4Select “Enable”. (/ then ENTER)

Item

Description

Disable

Does not place the system into Standby

(factory default)

 

 

 

Enable

Places the system into Standby if no operation is

 

performed for three hours

 

 

Image position adjustment (AV mode only)

This function adjusts an image’s horizontal/vertical position on the Plasma Display.

1Press HOME MENU.

2Select “Option”. (/ then ENTER)

3Select “Position”. (/ then ENTER)

4Select “H/V Position Adjust”. (/ then ENTER)

Position

H/V Position Adjust

Reset

5Press HOME MENU again to exit the menu.

NOTE

•Five minutes before the system is placed into Standby, a message appears as each minute counts down.

Power Management (PC mode only)

The system automatically enters Standby when no signal is received from the PC.

1Press HOME MENU.

2Select “Power Control”. (/ then ENTER)

3Select “Power Management”. (/ then ENTER)

4Select “Mode1” or “Mode2”. (/ then ENTER)

Item

Description

Off

No power management

(factory default)

 

 

 

Mode1

• Places the system into Standby when no signal is

 

received from the PC for eight minutes

 

• Although the PC is accessed and a signal is

 

received again, the system stays off.

 

• Press STANDBY/ON on the Plasma Display or TV

 

on the remote control to turn the panel On

 

 

Mode2

• Places the system into Standby when no signal is

 

received for eight seconds

 

• Access the PC (a signal is received again), the

 

system turns On

 

• Press STANDBY/ON on the Plasma Display or TV

 

on the remote control to turn the panel On.

 

 

5Press HOME MENU again to exit the menu.

62

5Adjust the vertical position (/) or horizontal position (/).

6Press HOME MENU again to exit the menu.

NOTE

•To restore the factory defaults, press / to select “Reset” in step 4 then press ENTER. A confirmation screen appears. Press / to select “Yes” then press ENTER.

•Adjustments are stored separately for each input source.

•Depending on the displayed video, the image position may not change even after adjustment.

Automatic image position and clock (Hertz) adjustments (PC mode only)

Use Auto Setup to automatically adjust image positions and clock speeds when coming from a PC.

1Press HOME MENU.

2Select “Option”. (/ then ENTER)

3Select “Auto Setup”. (/ then ENTER)

Option

Auto Setup

Manual Setup

• Auto Setup begins.

4Press HOME MENU again to exit the menu.

NOTE

•When Auto Setup is finished, “Auto Setup completed.” appears.

•Although “Auto Setup completed.” appears, Auto Setup may have failed, depending on conditions.

•Auto Setup may fail with a PC image composed of similar patterns or a monochrome picture. If Auto Setup fails, change the PC image and try again.

•The PC and the Plasma Display must be turned On before starting Auto Setup.

En

Page 61 Page 63
Image 62
Page 61 Page 63
Contents PRO-1140HDPRO-940HD Ventilation Caution Operating Environment Information to UserFor Canadian model EnglishContents Contents Useful Remote Control Features AppendixUsage guidelines Installation guidelinesImportant User Guidance Information Plasma Display protection function When not using the product for a long timeCleaning the cabinet CondensationPreventing damage from screen burning About the menu window size following video format switchImage Retention Panel sticking and after-image lagSafety Precautions When using other items Installation PrecautionsWhen using the optional brackets or equivalent items Rear view PRO-1140HDRemote control unit AA size battery x Hexagonal wrench x Supplied AccessoriesPower cord 2 m/6.6 feet Cleaning cloth Front/side view PRO-1140HD Part NamesPlasma Display Ability to operate the TV Guide On Screen systemFront/side view PRO-940HD Viewed from below of the display Viewed from the front side of the display Side view17 18 21 Terminals located on the upper edge of the compartment17 18 21 2024 Remote control unit Favorite CH A, B, C, DMoving the Plasma Display Installing the Plasma DisplayPreparation Mm min Preventing the Plasma Display from Falling OverStabilizing on a table or floor Reattaching the stand Attaching/detaching the Pioneer stand for PRO-940HD onlyDetaching the stand Inserting the CableCARD Switching between antenna a and BConnecting VHF/UHF antennas and a Cable Battery disposal Preparing the remote control unitAllowed operation range of the remote control unit Inserting batteriesConnecting the power cord Routing cablesBasic Operations Turning on the powerTurning off the power Changing channels Watching TV channelsSelecting the antenna Changing the language Changing the volume and soundVolume + Volume adjustment display Muting display When receiving Mono + SAP sound signals Setting MTS/SAP modeWhen receiving Stereo sound signals When receiving Stereo + SAP sound signalsViewing a channel banner Using the multiscreen functionsUsing the POD service Splitting the screenMoving image Use the following procedure to capture and freeze one frameFreezing images About the TV Guide On Screen system Setting up the TV Guide On Screen systemSystem Setup Screens Welcome ScreenTV Guide On Screen System Setup Screen 8 Is a VCR Connected? Screen 9 VCR Configuration DiagramScreen 12 VCR Code Testing Screen 10 VCR Brand NameScreen 16 Helpful Information Screen 14 Confirming Your SettingsScreen 15 Congratulations AV mode menus Menu SetupMenu Configuration PC mode menusTuner Setup Setting up TV channelsChecking the CableCARD ID Changing the passwordParental Control Voluntary movie rating system MpaaSetting the TV ratings Clearing the passwordSetting the voluntary movie rating system Mpaa If you forget the passwordBlocking Not Rated TV programs Setting the TV Parental Guidelines TVCanadian rating systems Canadian English ratingsSetting new ratings Setting Canadian English ratingsSetting Canadian French ratings Select Tuner Setup Then Enter Select Parental ControlAntenna a or antenna B Deleting new ratingsTemporarily deactivating the Parental Control Input 1Activating the closed caption Setting your favorite channelsSetting up closed captions Selecting the type of conventional closed captionsSelecting digital closed caption parameters Clock SettingSelecting digital closed captions Select the desired parameter. / then EnterAuto Set Ant. a Xxxxxxxxxxxxxxxxxxxxx Monday Screen components Using the TV Guide On Screen systemTV Guide On Screen System Operation TV Guide On Screen iconsKey What it does Listings screenTV Guide On Screen navigation Recording programs While recording is in progress Setting program remindersWhen the recording is about to start Press a to make the Timer Alert screen disappear When scheduled reminder is due auto-tune is onWhen a scheduled reminder is due auto-tune is OFF Searching for programs Searching by categoryTV Guide On Screen System Operation Navigation and search tips Alphabetical searchSearch Episode Options menu Scheduling recordings and reminders Schedule Options menuChanging the Channel Display settings Changing setup optionsChanging the System Settings Record defaults Changing the Default OptionsGeneral default options Remind defaultsAV Selection Adjustments and SettingsSleep Timer For AV sourceFor PC source, the following screen appears Basic picture adjustmentsSelect the desired level Screen appears. Press / to select Yes then pressUsing Color Temp Advanced picture adjustmentsUsing PureCinema To adjust another item, press RETURN, then repeat steps 7Using Color Space Using CTIUsing Color Management Using Intelligent ColorUsing the Dynamic Range Expander DRE functions Eliminating noise from imagesAdjust the sound to your preference. See Sound adjustmentsUsing the 3DYC and I-P Mode ModePower Control provides convenient power saving options Power ControlNo Signal off AV mode only Front SurroundPower Management PC mode only Image position adjustment AV mode onlyNo Operation off AV mode only Select Option. / then Enter Select Auto Setup. / then EnterPC mode except for XGA signals Manual image position and clock adjustments PC mode onlyAV mode PC mode for XGA signalsSelecting a screen size automatically Selecting a screen size for 43 aspect ratio signalsPC mode except for XGA signals Dot by Language setting Watching a DVD image Using External EquipmentAbout External Equipment Watching a VCR imageHdmi equipment To specify the digital video signal type Using Hdmi InputConnecting Hdmi equipment To specify the type of audio signalsConnecting a game console or camcorder Using a game console or watching camcorder imagesRecording digital TV programs using a Displaying an image of the game console or camcorderConnecting an AV receiver Connecting other audio equipmentConnecting a recorder Subwoofer AV receiverDisplaying an image from a PC Connecting a personal computerWatching an image from a computer Link connection Computer compatibility chartWhen connecting the VCR Plasma Display rear view Attaching the ferrite coreConnecting control cables About SR+Enjoying the Home Media Gallery Supported file formatsConnecting a USB device Making network connectionsReadable data files Starting the Home Media Gallery functionReadable memory cards Removing a USB deviceThumbnail screen Using the Tool MenuSelectable screen display Thumbnail List screenScreen Components Enjoying movie filesMedia Navigator My PlaylistTime Search Enter the desired time using buttons 0 toMovie Player key guide /Slow Playback Repeat ModeRandom Mode Add to My PlaylistEnjoying music files Screen Components Music Player key guideWhile playing content in the Playlist, press C to select Enjoying photo filesPhoto Player key guide Setting up the slideshowSelect OK / then Enter Slideshow setup finishes Rotating the image Setting up BGMStarting the slideshow Repeating the slideshowSort Other useful functionsSearch Adding files to My PlaylistSetup Switching the server Software Update Resetting to defaultOther convenient features Screen saverDialog Screen Message Auto Connection SetupMessage Problem Glossary Presetting manufacturer codes to control other devices Useful Remote Control FeaturesLearning function of the remote control unit Presetting manufacturer codesManufacturing Reset Programming codes CableVCR SEG PVR DVD-R Receiver control buttons Using the remote control unit to control other devicesMode switch with TV selected Enter Mode switch with CBL/SAT selectedCBL/SAT control buttons CH +Mode switch with VCR selected VCR control buttonsDVD/DVR control buttons Appendix TroubleshootingProblem Possible Solution 102 Code Message Check Image or sound is interrupted orOriginal SSLeay License 105 Giflib distribution is Copyright c 1997 Eric S. Raymond Copyright c 1988-1997 Sam LefflerPreamble Linux Source NoticeGNU General Public License Copyright c 1991-1997 Silicon Graphics, Inc108 No Warranty How to Apply These Terms to Your New ProgramsGNU Lesser General Public License Modified work must itself be a software library 112 113 How to Apply These Terms to Your New Libraries Specifications Plasma Display Model PRO-1140HD Model PRO-940HDDimensions PRO-1140HD Unit mm inch Important Notice about software upgrade from Pioneer Pioneer Corporation
Top Page Image Contents