Adjustments and Settings | 11 |
Sleep Timer
When the selected time elapses, the Sleep Timer automatically places the system into standby.
Press SLEEP to select the desired time.
•The timer starts counting.
•Each time you press SLEEP, the selection cycles as below:
30 
60 
90
(cancel) Off |
| 120 | (minutes) |
|
•The factory default is “Off”.
NOTE
•To cancel the Sleep Timer, select “Off” by pressing SLEEP.
•Five minutes before the selected time elapses, the remaining time appears every minute.
You can also use this menu to set the Sleep Timer.
1Press HOME MENU.
2Select “Sleep Timer”. (
/
then ENTER)
3Select the desired time. (
/
then ENTER)
4Press HOME MENU again to exit the menu.
AV Selection
Viewing options depend upon the current environment (e.g., room brightness), the type of the current TV program, or the type of images input from external equipment. To change the view, follow the directions below.
1Press AV SELECTION.
•The current AV Selection mode appears.
2Press AV SELECTION again before the displayed mode disappears.
•For AV source, the mode cycles in this order; STANDARD, DYNAMIC, MOVIE, GAME, PURE and USER.
•For PC source, the mode toggles between STANDARD and USER.
You can also use the menu to change the options.
1Press HOME MENU.
2Select “Picture”. (
/
then ENTER)
3Select “AV Selection”. (
/
then ENTER)
4Select the desired option. (
/
then ENTER)
AV Selection
STANDARD
DYNAMIC
MOVIE
GAME
PURE
USER
For AV source
Item | Description |
STANDARD | For a highly defined image in a normally bright |
| room |
| This selection is shared by the external input and |
| TV input sources. |
|
|
DYNAMIC | For a very sharp image with maximum contrast |
| This mode does not allow manual image quality |
| adjustment. |
| This selection is shared by the external input and |
| TV input sources. |
|
|
MOVIE | For movies |
| This selection is shared by the external input and |
| TV input sources. |
|
|
GAME | Lowers image brightness for easier viewing |
| This selection is shared by the external input and |
| TV input sources |
|
|
PURE | Reflects input signals as faithfully as possible |
| For example, you may select this option to check |
| image materials. |
|
|
USER | Allows you to customize settings as desired |
| You can set the mode for each input source. |
|
|
For PC source
Item | Description |
STANDARD | For a highly defined image in a normally bright room |
|
|
USER | Allows you to customize settings as desired |
| You can set the mode for each input source. |
5Press HOME MENU again to exit the menu.
NOTE
•You can also press AV SELECTION on the remote control unit to change the viewing option.
•Selecting the DYNAMIC viewing setting causes all other viewing options to become unavailable (grayed out).
English
55
En