RCA LCDX3022W manual Care and Cleaning

Page 40

Other Information

No picture, no sound but TV is on

•Maybe the signal type is set wrong. Go to page 32 for detailed instructions.

•The channel might be blank — change channels.

•If you’re watching your VCR and it’s connected with coaxial cable to the Antenna/Cable jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).

Sound okay, picture poor

•Check antenna connections. Make sure all of the cables are firmly connected to the jacks.

•Try using the advanced picture settings to improve the picture. Go to page 30 for more instructions.

Black box appears on the screen

•Closed caption might be on. Check Closed Caption in the Preferences menu. Go to page 31 for more instructions.

The Remote Control Doesn’t Work

•Something might be between the remote and the remote sensor on the component. Make sure there is a clear path.

•Maybe the remote isn’t aimed directly at the component that you’re trying to operate.

•Maybe remote is not in TV Mode. Press the TV button so remote will control TV.

•Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote.

•When using the Learning feature, do the learning process in low light areas to prevent natural light and fluorescent light interfering with the infrared signals.

•For Volume Punchthrough, remember to program the AUDIO button on the TV’s remote control to operate your audio receiver or amplifier. Go to page 15 for instructions. If you can’t program this remote to operate your audio receiver, Volume Punchthrough won’t work.

Problems with V-Chip/Parental Controls

The rating limits don’t work

•You must activate the settings. Go to the MAIN MENU (press MENU on your remote), select Parental Control, highlight and turn on Lock Parental Controls (box has check mark).

I don’t remember my password and I want to unlock the TV

•If you forget your password you can reset it. Make sure no menus are displayed on-screen. Simultaneously press and hold VOL < on the TV’s side panel and the OK button on the remote for approximately 10 seconds. Enter a new password next time you access the Lock Parental Controls menu.

The V-Chip won’t let me watch a program even though it’s not rated as violent.

•Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must unlock NR separately in order to view movies with an NR rating.

Care and Cleaning

CAUTION: Turn OFF your TV before cleaning.

You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation.

The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV.

While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to the TV.

36

Graphics contained within this publication are for representation only.

Chapter 5

Page 39 Page 41
Image 40
Page 39 Page 41
Contents User’s Guide Important Information Product Registration Product InformationImportant Safety Instructions O U N D C L a M P SThis page left intentionally blank Table of Contents Using the Menu System Other InformationConnections & Setup Things to Consider Before You ConnectBottom Panel Explanation of JacksRGB Input VID1 Input Cmpt Component InputSide Panel Using the DVI Jack Connect Your CableChoose Your Connection Connection to AV ComponentsUsing the Cmpt Jack Using the RGB JackAdjust the Viewing Angle of the TV Set Up Your TVPlug in the TV Put batteries in the remoteChoose the Menu Language Choose the Signal TypeComplete Channel Search Using the Remote Control Button Descriptions for TV ModeUsing the Input Button Button Descriptions for Other ModesUsing Automatic Code Search Programming the Remote to Operate Other ComponentsFind Out If You Need to Program the Remote Programming the RemoteHow to Use the Remote After You’ve Programmed It Learning FeatureUsing Direct Entry Adding a Learned Function Up to 2 inches apartClearing a Learned Function Volume Punchthrough FeatureDeleting ALL Learned Functions Remote Code List Deleting ALL Volume Punchthrough CommandsPVR Codes Using the TV’s Features Why You Should Use the Autotuning FeatureHow to Set Up the Autotuning Feature About the Channel BannerUsing the PIP Feature AutotuningPIP Picture-in-PC Operation PIP ButtonsPIP Problems? Parental ControlsHow V-Chip Works Parental ControlUS V-Chip Rating System Canadian English V-Chip Rating SystemCanadian French V-Chip Rating System Chip TV RatingsBlocking Age-Based Ratings V-Chip Rating Limit ScreenViewing Age-Based Ratings Blocking Specific Content Themes Viewing Specific Content ThemesChip Movie Rating Limit Chip TV RatingsBlocking Canadian V-Chip Ratings Blocking Movie RatingsViewing Movie Ratings French RatingsFront Panel Block Chip Unrated/Exempt BlockChannel Block Additional Features Lock/Unlock Parental ControlsUsing the Menu System Menus, On-screen Help, and Control PanelsExiting a menu ControlsPicture Menu Choice ListsNumeric Entries Option ListsSound Menu Adv. Picture SettingsSound Preferences Menu Parental Control MenuPreferences Setup Menu TimersSetup Channel ListPC Picture Quality Menu PC Picture Size MenuPC Sound Menu Picture SizePC Information Center PC Preferences MenuInformation Center Troubleshooting Other InformationCare and Cleaning Limited Warranty How State Law relates to warranty Accessory Information How to OrderFCC Information
Top Page Image Contents