USING THE REMOTE
REMOTE BUTTONS
ON•OFF When in TV mode, turns TV on and off. If in another device mode (VCR, DVD, Satellite, etc.) and programmed, will turn the device on and off. When pressed twice within two seconds, all devices that are on will be turned off (this feature only works with most RCA, GE, or PROSCAN products).
VCR1 Puts the remote in VCR mode and if autotuning is enabled, it will turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the remote in TV mode. Also displays channel information.
DVD Puts the remote in DVD mode and if auto tuning is enabled, it will turn on the TV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if auto tuning is enabled, it will turn on the TV and tune to the correct channel.
LED Red light which indicates programming mode when programming the remote. Also displays when a valid remote button is pressed.
AUX When pressed, will turn on the component you have programmed it to control. Also turns on the TV if auto tuning is enabled and the remote is programmed to control the TV.
SAT•CABLE Puts the remote in SAT•CABLE mode and if auto tuning is enabled, it will turn on the TV and tune to the correct channel.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore the volume.
SKIP Press once before changing channels and the TV will bring up the PIP window and wait 30 seconds before returning you to the original channel. Press repeatedly to add more time.
CH ^ or CH v Scans up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels.
VOL< or VOL> Decreases or increases the TV’s volume.
SOUND Press once to display the audio processor choice list. Point and select to choose a different processor or press CLEAR to exit.
GO BACK Returns you to the previous channel.
GUIDE Brings up and exits the GUIDE Plus+ system. In SAT•CABLE mode, brings up available
INFO Brings up channel information.
MOVE (Arrows) Used to point to different items in the menu system. Also used to adjust the menu controls. Also move the PIP window when no menus are on the screen.
OK When in the menu system, selects highlighted items or returns you to the previous menu.
LED
VCR1 | ON OFF | TV |
DVD | VCR2 AUX | SAT CABLE |
MUTE | CH + | SKIP |
|
| |
L |
| V |
O |
| |
| O | |
V |
| |
|
| L |
| CH - |
|
SOUND |
| GO BACK |
GUIDE |
| INFO |
OK
MENUCLEAR
1 
2 
3 
4 
5 
6 
7 
8 
9 
WHO
INPUTANTENNA
0 
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
PIP SWAP CH CTRL RESET
22