SETUP AND CONNECTIONS
ADVANCED CONNECTIONS
Advanced connections give you better sound and video by separating the audio and video signals and enabling you to connect multiple components.
This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.
Back of the TV
The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Once you have made your connections you will need to program the TV to tune to the correct Video INPUT channel in order to see and hear audio and video from the component. You will program this later in the Interactive Setup.
| Input 1 |
Connect any of the following components: | |
• VCR | • Internet Access Device |
• Laserdisc Player | • DVD Player |
•Satellite Receiver
To view the component connected to Input 1: Use the WHO•INPUT button on the remote.
| Input 2 |
Connect any of the following components: | |
• VCR | • Internet Access Device |
• Laserdisc Player | • DVD Player |
•Satellite Receiver
To view the component connected to Input 2: Use the WHO•INPUT button on the remote.
S-Video
This optional connection can be used for better video quality picture.
TV |
|
|
|
| SPEAKER | + RIGHT - | + LEFT - |
| SELECTION | ||
| EXTERNAL INTERNAL |
| |
| SPEAKERS |
|
|
| INPUT 2 |
| |
INPUT 1 | VIDEO | ||
VIDEO |
|
| |
|
|
| |
R | R |
|
|
AUDIO | AUDIO |
| CABLE/ |
L | L |
| ANTENNA |
|
|
| INPUT |
AUDIO OUTPUT |
| ||
|
| ||
External Speaker Jacks
Use to connect external speakers for surround sound. Make sure the Speaker Selection is set to EXTERNAL.
This optional connection can be used for better video quality picture.
Audio Outputs
Connect to an audio receiver or amplifier for variable controlled or fixed level stereo output.
Cable/Antenna
Takes the signal input from a cable, cable box, or an
Connect the
6