TV Signal Connection
The first step in connecting your TV is obtaining the signal. Your TV 42PA30RQ has a side panel, which allows you to receive analog and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive air local digital and analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE jack of the side panel. You are ready to receive
C. Set-Top Box
If you use a
Note: Do not plug the AC cord until you have accomplished all the connections.
AC
110V/60Hz
Cable TV | Antenna |
WALL
OUTLET
Or
ANT/
CABLE
AC Power Cord
(Connect after all the other connections are done.)