Connections and Setup
VCR
VIDEO | AUDIO |
| IN FROM ANT | CH3 |
OUT |
|
|
| |
|
|
| CH4 | |
|
|
|
| |
| R | L | OUT TO TV | 3 |
IN |
|
| ||
R | L |
| ||
|
|
|
| 3 |
TV (back panel) |
|
|
| From Cable |
|
|
| or Antenna |
2
VIDEO | NIPU | ||
|
|
| T2 |
Y | PB | PR |
|
INP | CABLE/ |
UT1 | ANTENNA |
VPORT | VIDEO |
| ||
| AUDIO | R | L | 1D |
| OUT |
|
|
|
| |
1B | 1A |
|
DVD | 1C |
|
|
| |
|
| OUT |
Y Pr Pb | VIDEO R | L |
|
|
Connecting Components to Your TV
For information on using the different jacks on the back of your TV to hook up other components not listed below, see the following pages.
Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call
*If you connect an
TV + VCR + DVD Player
1.Connect your TV to your DVD player
A.Connect the audio cables (white and red) to the INPUT2 AUDIO R and L jacks on the back of the TV and to the Audio Output Jacks on the DVD player.
B.If your DVD player has Component Output Jacks (Y, PB, PR), connect three video grade cables to the Y, PB, PR jacks on the DVD player and to the Y, PB, PR jacks on the back of the TV. If your DVD player doesn’t have Y, PB, PR jacks, go to C.
C.If your DVD player has an
D.Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the INPUT2 VIDEO jack on the back of the TV.
2.Connect your TV to your VCR
Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).
3.Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet or antenna to the Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
Chapter 1 | Illustrations contained in this document are for representation only. | 3 |