Panasonic E50 manual To check programmes, Starting and canceling programmes

Timer recording (continued)

To check programmes

[RAM] [DVD-R]

Press [PROG/CHECK] (13).

The Timer Programme List screen appears.

	TIMER					Remain 1:58 SP
	RECORDING
						1:19:00		16.7 TUE
	No.	Name	Date	Start	Stop	Mode	PDC	Disc
								space
	01	BBC 1	16/ 7 TUE	1:19	1:22	SP	OFF	OK
A	W 02	BBC 1	16/ 7 TUE	1:20	2:20	SP	OFF	OK
	F 03	BBC 1	24/ 7 WED	8:00	9:00	SP	OFF	OK
	04	BBC 1	24/ 7 WED	9:00	10:00	SP	OFF	OK
	X 05	BBC 1	24/ 7 WED	10:00 11:00		SP	OFF	OK
			New Timer Programme
	SELECT
			CANCEL

ENTER RETURN

Icon explanations (A)

¥This programme is currently recording.

WThe programme is overlap with another programme.

FThe disc was full or the maximum number of programmes or scenes was reached so the programme failed to record.

The television programme was copy-guarded so the programme failed to record.

XThe programme failed to record for some other reason.

Disc space

OK:Displayed if the recording can fit in the remaining space on the disc. However, when the programme becomes longer than scheduled during the recording by setting “PDC” to “ON”, the programme may not be recorded until its end.

#(Date): For recordings made daily or weekly, the display will show until when recordings can be made

based on the time remaining on the disc.

!:Displayed if the disc is not inserted in the unit or is write-protected (pages 38, 73) or there is not enough memory capacity left on the disc.

ªTo change the programme

(page 34)

ªTo exit from the Timer Programme List screen

Press [PROG/CHECK] (13) or [RETURN] (23). (The television is shown.)

For your reference

≥Programmes that failed to record are deleted from the list at 4 a.m. the day after tomorrow.

Starting and canceling programmes

[RAM] [DVD-R]

ªTo put the unit on recording standby

Press [, TIMER] (12).

The unit turns off and “ ” lights on the unit’s display.

Note

≥The unit cannot go to timer recording standby if the disc is protected (pages 38, 73) or full (“ ” flashes). Check the disc carefully.

ªTo release the unit from recording standby

If you want to record something else before the programme start time, for example:

Press [, TIMER] (12).

The unit turns on and “ ” goes out.

≥Be sure to press [, TIMER] (12) before the programme start time to put the unit on recording standby. The programme only works if “ ” is on.

ªTo stop recording while a programme is working Press [, TIMER] (12).

To clear a timer recording programme

[RAM] [DVD-R]

Press [CANCEL] (5) or [ERASE] (30) while the programme’s Timer Programme Correction screen is being shown.

(Alternatively, use [3, 4] (10) to select the programme in the Timer Programme List screen and press [CANCEL] (5) or [ERASE] (30).)

≥You can not delete programmes that are currently recording.

35