Panasonic E50 manual Connecting a Decoder, Connecting a satellite receiver or digital receiver

Connecting external equipments (continued)

Connecting a Decoder

Decoder here refers to the device used to decode scrambled broadcasts (Pay TV).

						RF IN
OPTICAL	R - AUDIO - L	VIDEO	S-VIDEO	OUT	AV1 (TV)
DIGITAL AUDIO OUT	R - AUDIO - L	VIDEO	S-VIDEO	AV4 IN	AV2 (DECODER/EXT)	RF OUT
(PCM/BIT STREAM)

Connecting a satellite receiver or digital receiver

						RF IN
OPTICAL	R - AUDIO - L	VIDEO	S-VIDEO	OUT	AV1 (TV)
DIGITAL AUDIO OUT	R - AUDIO - L	VIDEO	S-VIDEO	AV4 IN	AV2 (DECODER/EXT)	RF OUT
(PCM/BIT STREAM)

(1)

(3)

(2)

(1)Decoder (not supplied)

(2)21-pin Scart socket

(3)21-pin Scart cable (not supplied)

Connect a 21-pin Scart cable (not supplied) to the AV2 21- pin Scart socket on the unit and to the 21-pin Scart socket on the decoder.

Connect the decoder’s mains lead to an AC mains socket.

Set “AV2 Connection” to “DECODER”. (page 61)

≥If you connect an other equipment with RGB output capability to the AV2 socket on this unit, the output signal of the equipment must be set to RGB when you have set “AV2 Input” to “RGB (PAL only)”.

Note

[RGB] means separate Red/Green/Blue colour signals. If you connect a TV equipped with RGB input capability to the AV1 socket on this unit, and a decoder equipped with RGB output capability to the AV2 socket, the TV can receive RGB signal input from the decoder via the unit.

(1)

(3)

(2)

(1)Satellite receiver (not supplied)

(2)21-pin Scart socket

(3)21-pin Scart cable (not supplied)

Connect a 21-pin Scart cable (not supplied) to the AV2 21- pin Scart socket on the unit and to the 21-pin Scart socket on the satellite receiver.

Connect the satellite receiver’s mains lead to an AC mains socket.

Set “AV2 Connection” to “Ext Link 1” or “Ext Link 2”. (page 61)

≥If you connect an other equipment with RGB output capability to the AV2 socket on this unit, the output signal of the equipment must be set to RGB when you have set “AV2 Input” to “RGB (PAL only)”.

56