Panasonic E50 Erasing parts of a programme, Dividing programmes, To change the point to divide

Page 44

Using the DIRECT NAVIGATOR (continued)

Erasing parts of a programme

[RAM]

The specified parts of the programme are erased completely when you use this procedure and cannot be retrieved. Check the programme carefully to ensure it isn’t one you want to keep.

Preparation

≥Switch [DVD, TV] (15) to “DVD”.

≥Insert a disc you have recorded on.

After performing steps 1 to 3 of “Erasing programmes”, perform the following steps:

4Use [3, 4] (10) to select “Partial Erase” and press [ENTER] (10).

5Use search functions such as fast-forward and slow-motion to find the start point of the part you want to erase and press [ENTER] (10).

Partial

 

 

Erase

03

PLAY

 

 

 

Start

 

 

End

 

 

Next

 

 

Exit

SELECT

3

0 : 00 . 05

Start

End

ENTER

0 : 00 . 05

 

RETURN

– : – – . – –

 

6Use search functions such as fast-forward and slow-motion to find the end point of the part you want to erase and press [ENTER] (10).

Partial

 

 

Erase

 

 

03

 

Start

 

 

 

 

End

 

 

Next

 

 

Exit

3

3

0 : 10 . 15

SELECT

Start

End

ENTER

0 : 00 . 05

0 : 10 . 15

RETURN

7Use [3, 4] (10) to select “Exit” and press [ENTER] (10).

8Use [2] (10) to select “Erase” and press [ENTER] (10).

≥Play lists created with the erased part are also erased.

Partial erase

Remaining Time

0:19 SP

Corresponding PLAY LIST will also be erased.

Erase

Cancel

 

SELECT

ENTER

RETURN

ªTo stop partway through

Select “Cancel” in step 8 and press [ENTER](10). Or

Press [RETURN] (23).

ªTo erase another part of the same programme

Select “Next” in step 7 and perform step 8, then repeat steps 5-8.

For your reference

≥Use search and slow-motion to find the points.

≥You cannot specify an end point before a start point or a start point after an end point.

≥You may not be able to specify start and end points within 3 seconds of each other.

≥You cannot specify start and end points if the picture recorded is stilled.

≥The unit pauses play when the end of the programme is reached during this procedure.

≥The disc’s available recording time may not increase after erasing short parts of programmes.

≥Play lists created with the erased part are also erased.

Dividing programmes

[RAM]

You can divide a selected programme into two.

You must be sure you wish to divide a programme because once a programme has been divided it cannot be returned to its original form.

Preparation

≥Switch [DVD, TV] (15) to “DVD”.

≥Insert a disc you have recorded on.

After performing steps 1 to 3 of “Erasing programmes”, perform the following steps:

4Use [3, 4] (10) to select “Divide” and press [ENTER] (10).

5Use search functions such as fast-forward and slow-motion to find the point you want to divide and press [ENTER] (10).

Divide

 

Programme

 

03

Preview

 

 

Divide

 

Exit

3

0 : 00 . 05

SELECT

Divide

ENTER

0 : 00 . 05

RETURN

6Use [3, 4] (10) to select “Exit” and press [ENTER]

(10).

7Use [2] (10) to select “Divide” and press [ENTER]

(10).

≥The programme is divided at the point.

Divide Programme

Once divided, this programme cannot be re-combined.

Divide

 

Cancel

SELECT

ENTER RETURN

ªTo stop partway through

Select “Cancel” in step 7 and press [ENTER](10). Or

Press [RETURN] (23).

ªTo change the point to divide

Select “Divide” in step 6, then repeat steps 5-7.

ªTo check the division point

By selecting “Preview” in step 6 and pressing [ENTER](10), play will begin from a point 10 seconds prior to the division point. You may wish to make sure that the division point is at an appropriate location.

Note

≥The divided programmes retain the title of the original programme. ≥A minute portion of the recording directly preceding the division

point may be lost.

For your reference

≥Use search and slow-motion to find the points.

≥It is not possible to carry out “Divide” in the following cases: -When the resulting part(s) are extremely short.

-When the total number of programme is more than 99.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents DVD Video Recorder Contents @ N Remote control Control reference guideMain unit Entering titlesUnit’s display Control reference guideFor your safety DisplaysDisposal of old equipment Inside of unitChecking the Accessories How to replace the FuseCheck that you have the accessories shown Dear CustomerRemote control Remote control signal sensor Switch DVD, TV 15 to DVDBatteries UseRemote control Television operationDiscs Discs you can useDiscs you can use for recording and play Play-only discsDiscs that cannot be played Audio format logosTypes of disc for the type of connected DiscsConnections with Scart leads Follow the step-by-step guide belowHint ReferenceConnections without Scart leads Connect the RF Output socket to the TV aerial socketConnections with S-Video cable Signals from the Sky Digital STB Recording RGB SignalsStandby to ensure continuous output of RGB signals Auto Setup with Q Link Functions To Set Up this DVD Recorder with a brand-new Q Link TVAuto Setup without Q Link Functions To Set Up this DVD Recorder with an existing Q Link TVAuto Setup with Q Link Functions To restart Auto SetupRemoving Interference Auto Setup without Q Link FunctionsVideo Plus+ Codes for Satellite Receivers/Cable TV ≥43 factory setting ≥169 Selecting TV screen typeUse 3, 4 10 to select the TV aspect and press Enter To return to the previous screenErasing a programme that is being played When a menu screen appears on the televisionPlaying discs Starting play from where you stopped it Resume Function Quick View Play t1.3Fast forward and rewind-SEARCH Slow-motion playSelecting an amount of time to skip Time Slip SkippingManual Skip When using DVD-R Changing audioMarking positions directly Using Display menus to mark positionsMarking places to play again Marker Using menus to play MP3 discs Using the tree screen to find a groupRecording television programmes Stop recording Recording television programmesEXT Link To perform Direct TV RecordingPlaying while you are recording Simultaneous recording and playTo stop play and recording Press Direct NavigatorUsing the Functions window Using the Functions windowChecking the recording during recording Time Slip Watching the television while recordingUsing the Functions window Functions window iconsTimer recording Using Video Plus+ number to make timer recordingPress Video Plus+ 2 button Press the numeric buttons 4 to enter the Video Plus+ numberTimer recording To change the programmeIf - appears under Name after entering a Video Plus+ number Use 3, 4 10 to make the on indication appearTo put the unit on recording standby To change the timer recording programmeManual programming Starting and canceling programmes To clear a timer recording programmeTo put the unit on recording standby Press , Timer To check programmesWhen connected to the other equipment Recording from a video cassette playerTo select the TV system PAL/NTSC Use 3, 4 10 to select the TV system and press EnterAbout Disc Information Entering titlesEnter Title Disc Information Disc ProtectionReleasing disc protection Erase all programmes FormatTo stop finalizing Finalize Creating DVD-VideoUse 3, 4 10 to select Finalize and press Enter Using the Direct Navigator Selecting programmes to playTo clear the programme list About the programme listEntering and editing programme titles Checking programme contentsErasing programmes Protecting programmes Releasing programme protectionPadlock mark appears Padlock mark disappearsErasing parts of a programme Dividing programmesTo erase another part of the same programme To change the point to divideAbout the Play List Scene screen Using Play List to edit programmesDisplaying Play List Using Play List to edit programmes Creating Play ListTo specify another scene Select Next after and press ENTER10, then repeat steps 3To erase a Play List or a Play List Scene during play Playing Play ListPlaying Scenes Adding Scenes to a Play List Moving a SceneTo re-edit a Play List Scene Erasing a Scene from a Play ListChecking Play LIST’s contents Copying Play ListErasing a Play List Titling Play ListDisc menu Using Display menusCommon procedures Using Display menus Play menuPicture menu Sound menuIf the Video CD has playback control Repeat playUse 3, 4 Connecting external equipments To cancel the Child LockEnjoying more powerful sound Child LockConnecting a digital amplifier or system component a Connecting an analog amplifier or system component BConnecting external equipments To enjoy Dolby Pro LogicConnecting a Decoder Connecting a satellite receiver or digital receiverRear panel of this unit Connecting a video cassette recorderYellow Video White L Red R Press Functions Changing the unit’s settings≥Switch DVD, TV 15 to DVD Summary of settings TuningSettings Changing the unit’s settingsPicture SoundDisplay ConnectionEntering a password Ratings Digital outputRemote Setting Use 3, 4 10 to select the Settings tab and press 2 or 1≥The Setup screen appears ≥Use 1, the factory set code, under normal circumstancesChanging the unit’s settings Auto Clock Setting Clock SettingsManual Clock Setting Handling the Tuning BOX screen Channel SettingsSelecting the manual tuning Auto-Setup Restart, Download Changing the Owner ID Shipping ConditionHold down 7 on the main unit for more than 5 seconds Use 2, 1 10 to select Yes and press EnterStatus displays Changing the information displayedDisplay examples Press Status 28 to change the information displayedDisc handling Maintenance and HandlingMaintenance Glossary Glossary LinkTitle/Chapter DVD-Video TrackService Unit status Solutions Number Self-diagnosisU14 U99Error displays Error messages Causes and solutionsTroubleshooting guide PowerPicture SoundTroubleshooting guide Remote controlRemote control doesn’t work Cannot operate the television PlayRecording and timer recording Specifications Index 16, 17Disc 10, 20, 26 Dolby Digital 11, 54, 62
Related manuals
Manual 36 pages 42.41 Kb
Top Page Image Contents