Panasonic TQBC2372-1 manual Watching Videos and DVDs

Connect the external equipment to the Display and Power Off the external equipment.

Watching Videos and DVDs

Programming the Remote to Operate Peripheral Equipment

You can operate other manufacturers’ equipment using this Display’s remote control.

1

2	Press both buttons simultaneously for more
	than 3 seconds.
	Release the buttons when the equipment selection
	buttons start flashing.
3	Select the equipment.
	The selected button remains lit (other buttons are not lit).
4	code.Input the equipment’s 4-digit remote control
	(see page 48, 49)
5	control.Operate the equipment with the remote
	(see page 47)
	The external equipment turns On.

Press to return to the Display mode. DISPLAY

+

VCR DBS/CBL DVD

DISPLAY

PCCOMPO.

HDMI

フ

CH INPUT

DISPLAY

If the equipment does not operate with the remote control

•When your equipment has a single code Input the remote control code again

•When your equipment has multiple codes

Change the code with 4 above and test again

Note:

Registration will fail if the wrong code is input or it takes more than 30 seconds to register.

To find a code not listed in the code list

This procedure searches all codes and is called the “sequence method.”

1 After step 3 above, change the code and test.

change

Operate the equipment with the remote control. (see page 47)

•Repeat until the code is found.

•It may take many attempts before the correct code is found.

2 When the correct code is found.

store

44