Reduces power consumption
1 | Display the menu screen. | |||||
2 | Select “SET UP”. | |||||
|
| PICTURE |
|
|
| |
|
|
|
|
|
| |
|
|
| SET UP |
|
|
|
|
|
| POS. /SIZE |
|
|
|
|
|
| SOUND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 | Select the item and set. |
| ||
|
| |||
|
| SIGNAL |
|
|
|
| SCREENSAVER |
|
|
|
|
|
| |
|
|
| ||
|
|
| RGB |
|
|
|
|
|
|
|
| EXTERNAL SCALER MODE | OFF |
|
|
|
|
|
|
|
| POWER SAVE | OFF |
|
|
|
|
|
|
|
| STANDBY SAVE | ON |
|
|
|
|
|
|
|
| POWER MANAGEMENT | OFF |
|
|
|
|
|
|
|
| AUTO POWER OFF | OFF |
|
|
|
|
|
|
|
| OSD DESIGN | TYPE1 |
|
|
|
|
|
|
|
| OSD POSITION | UPPER LEFT |
|
|
|
|
|
|
|
| OSD LANGUAGE | ENGLISH (US) |
|
|
|
|
|
|
2 OK
1 select
2 change 1 select
SIGNAL
SCREENSAVER
| RGB |
|
|
EXTERNAL SCALER MODE | OFF |
|
|
POWER SAVE | OFF |
|
|
STANDBY SAVE | ON |
|
|
POWER MANAGEMENT | OFF |
|
|
AUTO POWER OFF | OFF |
|
|
OSD DESIGN | TYPE1 |
|
|
OSD POSITION | UPPER LEFT |
|
|
OSD LANGUAGE | ENGLISH (US) |
4 | Exit the menu. |
| or |
●POWER SAVE
●STANDBY SAVE
●POWER MANAGEMENT
●AUTO POWER OFF
When this function is turned ON, luminous level of the Plasma Display is suppressed, so power consumption is reduced.
When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 13, 15, 16), so standby power of the set is reduced.
When this function is set to ON, it operates under the following conditions to turn the power on or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC IN signal input:
→Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are subsequently detected:
→Power is turned on; the power indicator lights up green.
Notes:
•This function operates only during PC IN signal input.
•This function is effective when “SYNC” is set to “AUTO” and “COMPONENT /
Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input signals stop.
Note:
• This function is effective for input signals except PC IN terminal.
37