Panasonic CQ-DX200W manual User

Page 37

<Setup Menu> display (continued)

5. TV Type

TV standard format (PAL/NTSC) setting

(Default: NTSC (CQ-DX200W3)/PAL (CQ-DX200W5))

Note: Setting should be made to match the format of the connected monitor. Select NTSC if connections are made possible for both NTSC and PAL. If you select PAL, a picture may be partly omitted.

1.NTSC The unit transmits the NTSC formatted signal in either case, playing an NTSC formatted video or a PAL formatted video.

2.PAL The unit transmits the PAL formatted signal in either case, playing an NTSC formatted video or a PAL formatted video.

3.Multi The unit transmits the same video signal as the output of playing video software. Note: If the connected monitor cannot automatically select between NTSC and PAL according to the video signal of the disc to be reproduced, images on the screen may be distorted. Select NTSC or PAL at the monitor side depending on the disc to be reproduced.

4.Return The display returns to “Setup Menu”.

Note: Holding down the [OSD] button on the remote control for 2 sec. or more before disc play allows users to toggle between NTSC and PAL.

6. TV Display

Display aspect setting (Default: WIDE)

1.WIDE (16:9) Plays in the Wide mode when a wide-screen monitor is connected.

2.Pan & Scan (4:3) Plays in the Pan & Scan mode when a conventional monitor is connected.

3.Letterbox (4:3) Plays in the Letterbox mode when a conventional monitor is connected.

4. Return

The display returns to “Setup

 

Menu”.

Note: If “Pan & Scan” or “Letterbox” is already set in the software, this setting shall be ignored.

7. On-Screen Messages

This is to select On-screen Display messages which will

English

be displayed when On-screen Display is turned off by

 

pressing [OSD]. (a Page 30)

 

(Default: ON)

 

1.ON When the power is turned on, On-Screen Display message such as “Play” and “Pause” will be displayed on the screen for 5 seconds.

2.OFF When the power is turned on, On-Screen Display messages such as “Play” and “Pause” will not be displayed on the screen.

3.Return The display returns to “Setup Menu”.

8.D.Range Compression

By compressing the range of the playback level (the dynamic range), it is possible to maintain the impact of audio even at low volumes.

This function only works with Dolby Digital encoded material.

(Default: OFF)

1.Minimum Most compressed mode: TV

broadcasts,etc

2.Standard Mode recommended by software creators for listening at low volumes.

3. OFF

Not compressed dynamic range

4.Return The display returns to “Setup Menu”.

Note: When it is difficult to hear comparatively small sound (such as movie dialogue), selection of “Minimum” will make those sounds easier to hear.

 

Settings

9. DivX Registration

 

(a Page 28)

 

To return to the “Setup Menu” display, press

 

[RETURN].

User

 

[MENU]

Numeric buttons

[1] – [9]

[0]

 

(Finish the setting.)

CQ-DX200W37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DVD Player/receiver Safety Information Safety Information English Safety Information Before Reading These Instructions Models CQ-DX200W3 CQ-DX200W5 FeaturesDifferences between 2 Models Installation Instructions AccessoriesOperating Instructions QtyBefore Reading These Instructions, Features English FeaturesDiscs that can be Played Back Contents Main Unit Controls LayoutGeneral Controls Layout EnglishDiscs DVD/VCD/CD/MP3/DivX Preparation Battery ReplacementPreparation Before Initial Use Clock adjustment TV Type settingPress Disp Adjust the minute Press DispRemoving/Mounting GeneralPlate Volume off down Temporary Volume Off Down Clock Display at Power OffCancel General EnglishSystem-up Connector BluetoothRadio PlayerSelection Based on Genre General English AdjustmentSQ changeover Frequency adjustment Operation Flow Radio Mode DisplayPreset station selection RadioAuto Preset Memory APM Station PresetManual station preset Preset Station CallingCD Player CD Mode DisplayOperation Flow Track selectionCD Player Functions Only by Remote Control UnitPlayer MP3/DivX PlayerFile selection Pause Folder selectionMP3/DivX Player PlayRandom Play Repeat Play Folder Random Play Folder Repeat PlaySetting at file making What is MP3/DivX?Files Common No warrantyCompressed audio file writing CopyrightFlow DVD/VCD PlayerMode Disc Menu DVD DVD/VCD PlayerTitle Menu DVD Direct Selection during playbackDisplay the unit’s registration code About DivX VOD contentRange Compression DVD Subtitle DVD DivXAudio VCD Angle DVDOSD On-Screen Display OSD On-Screen DisplayCD Music CD DivXText off Chapter play time DVD DVD Video VCD Video CDDisconnect the USB memory and USB extension cable USB DisconnectFolder Random Play UnitFolder Scan Play Press Push SEL Select to select a mode to be adjusted Audio SettingPress Push SEL Select to display the Audio menu displayAudio Setting, Function Setting Function SettingFunction Menu Display Hold down VOLSetup Menu display User SettingsUser Language code. See below Language Code ListCode Language Name Language Code List, Troubleshooting TroubleshootingProblem No power to Unit Sound is not Generated Noise Check the wiringAntenna installation or wiring of antenna cable is faulty Check the speaker wiringCheck the wiring of the antenna battery lead ChassisNo playback or Disc ejected Sound skipping or Noise TroubleshootingDisc unejectable Secure the unit to the console boxBattery is weak Remote control unitAiming direction of the remote control unit is wrong Compressed audioConnect cables correctly Picture Appears IncorrectlyCannot switch Audio Language/subtitle Language/angle Problem Video CD menu Playback does not WorkDVD/VCD No subtitles Appear It is difficult toCD/Compressed Audio DivX VOD displayed on Error Display MessagesConnected monitor DisplayNearest authorized Panasonic Service Center Maintenance/FuseFuse Disc cleaning How to hold the discPlayable System Upgrade Sample Connectable Devices System Upgrade Sample, GeneralDisc selection Operation Flow CD Changer Mode DisplayFolder up/down Track/File selectionDisplay Direct AccessFolder Repeat Only for MP3 disc Disc Random Only for CD changerOperation Flow DVD Changer Mode Display Disc Changer when DVDs or VCDs are loadedLoaded ¡For a DVD insertion ¡For a VCD insertionAre Playing IPod ControlFile Selection Pause Control Play IPod Mode DisplayShuffle SongsEstablish pairing. a next BluetoothPress SRC to select the Bluetooth Mode Select the BT HF mode/BT AudioBluetooth BT Function Menu Display Press Push SEL Select to select a mode to be adjustedPerform each set- ting Disc Changer Verify the wiringIPod Control Bluetooth Definition of Terms General Disc Player Radio SpecificationsFM stereo radio AM radioMemorandom Specifications, MemoWeb Site http//panasonic.net
Top Page Image Contents