Error Display Messages (continued)
Display
USB (MP3/WMA) (continued)
Possible cause a Possible solution
A USB device the capacity of which exceeds the acceptable current was connected. For some reason, an
aUse a USB memory that has a consumption current of less than 500 mA.
aSwitch the source, and select the USB (MP3/WMA) mode again. (When the USB connector section lights blue, it is normal.)
aCheck that the USB connector section is not dirty, and that there is no foreign material.
No operation by some cause.
aTurn off the power and turn on the power again, or turn the key to the ACC OFF position and turn the key to ACC ON position again. If this does not solve the problem, unplug the power cord and plug it in again. In case the unit is still out of order, consult your dealer. (a Installation Instructions)
The player for some reason cannot read the file you are trying to play. (File recorded in an unsupported file system, compression scheme, data format, file name extension, damaged data, etc.)
aConfirm that the USB extension cable is firmly connected, and reconnect if not. Select a file that the player can read. Check the type of data stored in the USB memory. Format the USB memory if necessary.
Maintenance/Fuse
Cleaning the Unit
Fuse
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center.
Warning
¡Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your
nearest authorized Panasonic Service Center.
46