Panasonic SC-PT450 manual Operating the television, Press and hold for 2 seconds

Page 33

Operating the television

You can use the remote control to operate a Panasonic television.

Aim the remote control at the television.

To switch the television on or off

To switch the television’s video input mode

Adjust the volume

To play audio from your television through your home theater system

Preparation

Connect your equipment referring to “Connect to the various television terminals” (\ page 9).

Press [EXT-IN] to select “AUX” as the source. Then reduce the volume on the television to its minimum, and control the volume on this main unit.

Note

•The remote control may not work properly with some models.

•You can enjoy 5.1-channel surround sound when you turn on Super Surround (MOVIE, MUSIC) (\ page 29).

Changing the main unit and remote control

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1 While pressing and holding [

] on the main unit

“REMOTE 2” appears on the main unit display.

2 To operate in “REMOTE 2” mode

+

(Press and hold for 2 seconds)

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both steps. (“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.

•If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.

•If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.

Note

You can still operate a television using the remote control (\ see above) even after switching the mode.

OTHER OPERATIONS ENGLISH

RQTX0066

33

RQT8043

Image 33

Contents Operating Instructions SA-PT450 System SC-PT450 Main unitSafety precautions Table of contents Please check and identify the supplied accessories AccessoriesRemote control UsePlacement of speakers Setup exampleIf irregular coloring occurs on your television Attaching to a wall Speaker installation optionsFitting speaker stands not included For front, center and surround speakersConnect to the power supply Connect to the antenna Simple setupMaking the connections Connect to the speakersTelevision with an Hdmi terminal Connect to the various television terminalsTelevision with a Video in terminal Television with Component Video in terminalsQuick Setup screen assists you to make necessary settings Performing Quick SetupDetails of settings To change these settings laterDiscs that can be played Disc informationCommercial discs Discs that cannot be playedMain unit Overview of controlsDVD DVD/CD EXT-IN AUX 31, Music P Remote controlDisc Basic play Using the remote controlThis feature does not work during program and random play \ ∞ Group skip Content skipPress 3, Play to resume playback Shows a disc top menuDisplaying current playback condition Advanced playPlaying data discs Playing data discs using navigation menusPlaying the selected track in the CD Text disc Playing HighMAT discsSelecting from the list Playing the programsFunctions Menu Using on-screen menusPlay Menu Picture Menu Other SettingsDisplay Menu Audio MenuOther Menu Conﬁrming Hdmi informationHdmi Status Hdmi is connected Hdmi InformationSetup menu Changing the player settingsDisplay Select the tabVideo tab Audio tabHdmi tab To enter the speaker setting Changing the delay time of the speakersTo ﬁnish the speaker setting Display tabTo clean discs Disc handling precautionsTips for making data discs Naming folders and ﬁlesDisc Operations English Manual tuning Using the radioSelecting the preset channels Automatic presettingAdjusting the amount of bass Subwoofer level Using sound effectsEnhancing the sound from the center speaker Center Focus Enhancing the surround sound effect Surround EnhancerEnhancing the stereo sound Dolby Pro Logic To output a test signalThis is one of the ways to get appropriate surround effects Press Test againOptional antenna connection Operating other equipmentOptional connections To select Music P AUX → Music PUsing the Viera Link Hdavi ControlTM Operating the television Press and hold for 2 secondsWhile pressing and holding Power Troubleshooting guideUnresponsive or inoperable function Speciﬁc operation undesirable or unexpectedMenus B repeatSound abnormal or improper Picture abnormal or unviewableUnit displays Progressive videoTelevision displays Listening to the radioGlossary Mm x 60 mm x 364.4 mm SpeciﬁcationsApprox .5 kg Approx .8 WLanguage code list MaintenanceClean this unit with a soft, dry cloth L0307LE1047