Panasonic SC-PT450 Progressive video, Unit displays, Television displays, Listening to the radio

Page 36

ENGLISH

Troubleshooting guide (continued)

7 Progressive video

 

Page

There is ghosting when

• This problem is caused by the editing method or material used on DVD-Video,

20

progressive or HDMI output is on.

but should be corrected if you use interlaced output. Set “Video Output Mode” in

 

 

Picture Menu to “480i” or “576i”. (Alternatively, press and hold [CANCEL] to switch

 

 

to “480i” or “576i”.)

 

 

• Disable the HDMI AV OUT connection and use other video connections. Make the

 

 

settings in the following order:

 

 

1 Set “Video Mode” in the “HDMI” tab to “Off”.

24

 

2 Set “Video Output Mode” in Picture Menu to “480i” or “576i”. (Alternatively, press

20

 

and hold [CANCEL] to switch to “480i” or “576i”.)

 

Pictures not in progressive output.

• Select “480p” or “576p” in “Video Output Mode” in Picture Menu.

20

 

• The unit’s VIDEO OUT terminal outputs an interlaced signal even if “PRG” is

9

 

displayed.

 

Closed captions not displayed.

• When HDMI or progressive output is on, closed captions will not be displayed.

—

7 Unit displays

 

 

The display is dark.

• Select “Bright” in “FL Dimmer” in the “Others” tab.

25

“NO PLAY”

• You inserted a disc the unit cannot play; insert one it can.

11

 

• You inserted a blank disc.

—

 

• You inserted a disc that has not been finalized.

—

“NO DISC”

• You have not inserted a disc; insert one.

—

 

• You have not inserted the disc correctly; insert it correctly.

14

“F61”

• Check and correct the speaker cable connections.

8

 

If this does not fix the problem, consult the dealer.

 

“F76”

• There is a power supply problem. Consult the dealer.

—

“DVD U11”

• Disc may be dirty. Wipe it clean.

26

“ERROR”

• Incorrect operation performed. Read the instructions and try again.

—

“DVD H & &”

• Trouble may have occurred. The numbers following “H” and “F” depend on the

—

“DVD F & & &”

status of the unit. Turn the unit off and then back on. Alternatively, turn the unit off,

 

& stands for a number.

disconnect the AC mains lead, and then reconnect it.

—

 

• If the service numbers fail to clear, note the service number and contact a qualified

 

service person.

 

“U70 &”

• The HDMI connection acts unusually.

—

& stands for a number.

– The connected equipment is not HDMI-compatible.

The actual number following “U70”

– The HDMI cable is too long.

—

will depend on the state of the main

– The HDMI cable is damaged.

—

unit.

 

 

“REMOTE 1” or “REMOTE 2”

• Match the modes on the main unit and remote control. Depending on the number

33

 

being displayed (“1” or “2”), press and hold [ENTER] and the corresponding

 

 

numbered button ([1] or [2]) for at least 2 seconds.

 

ENGLISH

REFERENCE

7 Television displays

“ ”

• The operation is prohibited by the unit or disc.

—

“Cannot play group xx, content xx”

• You are trying to display an incompatible group or content.

—

“Cannot display group xx, content

 

 

xx”

 

 

“Group xx, content xx is

• You are trying to play a protected group or content. You cannot play it.

—

protected”

 

 

“Check the disc”

• This disc may be dirty.

—

“This disc may not be played in

• Only DVD-Video discs that include or have the same region number as the one on

Cover

your region”

the rear panel of this unit can be played.

page

No on-screen display.

• Select “On” in “On-Screen Messages” in the “Display” tab.

25

Main unit’s screen saver remains.

• When using the HDMI connection, audio/video information is continually

—

 

transferred between the main unit and the television regardless of which source

 

 

has been selected on the main unit. This is normal.

 

7 Listening to the radio

Distorted sound or noise is heard.

• Adjust the position of the FM antenna.

—

“ST” flickers or does not light.

• Use an outdoor antenna.

31

A beat sound is heard.

• Turn the television off or move it away from the unit.

—

RQTX0066

36

RQT8043

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating Instructions System SC-PT450 Main unit SA-PT450Safety precautions Table of contents Accessories Please check and identify the supplied accessoriesRemote control UsePlacement of speakers Setup exampleIf irregular coloring occurs on your television Speaker installation options Attaching to a wallFitting speaker stands not included For front, center and surround speakersSimple setup Connect to the power supply Connect to the antennaMaking the connections Connect to the speakersConnect to the various television terminals Television with an Hdmi terminalTelevision with a Video in terminal Television with Component Video in terminalsPerforming Quick Setup Quick Setup screen assists you to make necessary settingsDetails of settings To change these settings laterDisc information Discs that can be playedCommercial discs Discs that cannot be playedOverview of controls Main unitRemote control DVD DVD/CD EXT-IN AUX 31, Music PUsing the remote control Disc Basic play∞ Group skip Content skip This feature does not work during program and random play \Press 3, Play to resume playback Shows a disc top menuAdvanced play Displaying current playback conditionPlaying data discs using navigation menus Playing data discsPlaying HighMAT discs Playing the selected track in the CD Text discSelecting from the list Playing the programsUsing on-screen menus Functions MenuOther Settings Play Menu Picture MenuAudio Menu Display MenuConfirming Hdmi information Other MenuHdmi Status Hdmi is connected Hdmi InformationChanging the player settings Setup menuDisplay Select the tabVideo tab Audio tabHdmi tab Changing the delay time of the speakers To enter the speaker settingTo finish the speaker setting Display tabDisc handling precautions To clean discsTips for making data discs Naming folders and filesDisc Operations English Using the radio Manual tuningSelecting the preset channels Automatic presettingUsing sound effects Adjusting the amount of bass Subwoofer levelEnhancing the sound from the center speaker Center Focus Enhancing the surround sound effect Surround EnhancerTo output a test signal Enhancing the stereo sound Dolby Pro LogicThis is one of the ways to get appropriate surround effects Press Test againOperating other equipment Optional antenna connectionOptional connections To select Music P AUX → Music PUsing the Viera Link Hdavi ControlTM Operating the television Press and hold for 2 seconds While pressing and holding Troubleshooting guide PowerUnresponsive or inoperable function Specific operation undesirable or unexpectedB repeat MenusSound abnormal or improper Picture abnormal or unviewableProgressive video Unit displaysTelevision displays Listening to the radioGlossary Specifications Mm x 60 mm x 364.4 mmApprox .5 kg Approx .8 WLanguage code list MaintenanceClean this unit with a soft, dry cloth L0307LE1047
Top Page Image Contents