Panasonic SC-PT450 B repeat, Menus, Sound abnormal or improper, Picture abnormal or unviewable

Page 35

7 A-B repeat

 

Page

 

 

 

Point B is automatically set.

• The end of an item becomes point B when it is reached.

—

7 Menus

 

 

The Setup menu cannot be

• Select “DVD/CD” as the source.

—

accessed.

• Cancel program and random play.

16

7Sound abnormal or improper

Sound is distorted.

• Noise may occur when playing WMA.

—

 

• When using the HDMI output, audio may not be output from other terminals.

—

Effects do not work.

• Some audio effects do not work or have less effect with some discs.

—

 

• Dolby Pro Logic II does not work if you have changed the play speed.

—

Humming is heard during play.

• An AC mains lead or fluorescent light is near the main unit. Keep other appliances

—

 

and cables away from the main unit (and wireless systems).

 

No sound

• There may be a slight pause in sound when you change the play speed.

—

 

• Audio may not be heard when more than 4 devices are connected with HDMI

—

 

cables. Reduce the number of connected devices.

 

 

• When using the HDMI connection, ensure that “Audio Output” in the “HDMI” tab is

24

 

set to “On”.

 

7Picture abnormal or unviewable

The picture on the television is not displayed correctly or disappears.

• The unit and television are using different video systems.

—

Use a multi-system or PAL television.

 

• The system used on the disc does not match your television.

 

– PAL discs cannot be correctly viewed on an NTSC television.

—

– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television

24

(“NTSC Disc Output” in “Video” tab).

 

• Ensure that the unit is connected directly to the television, and is not connected

31

through a video cassette recorder.

 

• Mobile telephone chargers can cause some disturbance.

—

• If you are using an indoor television antenna, change to an outdoor antenna.

—

• The television antenna wire is too close to the unit. Move it away from the unit.

—

• Picture may not be seen when more than 4 devices are connected with HDMI

—

cables. Reduce the number of connected devices.

 

• When using HDMI output, the video signal is progressive. Use other video

9

connections if your television is not compatible with progressive video.

 

• If the picture is distorted or not displayed when using HDMI output, press and hold

—

[CANCEL] until the picture is displayed correctly. (The output will return to “480p”or

 

“576p”.)

 

• When using the COMPONENT VIDEO OUT terminal, ensure that progressive

20

output is not selected when the connected television is not progressive compatible.

 

Press and hold [CANCEL] until the picture is displayed correctly. (The output will

 

return to “480i” or “576i”.)

 

ENGLISH

Picture size does not fit the screen.

• Change “TV Aspect” in the “Video” tab.

24

 

• Use the television to change the aspect. If your television does not have that

21

 

function, change “4:3 Aspect” in Display Menu.

 

 

• Change the zoom setting. (“Just Fit Zoom” or “Manual Zoom” in Display Menu)

21, 22

Menu is not displayed correctly.

• Restore the zoom ratio to “x 1.00”. (“Manual Zoom” in Display Menu)

22

 

• Set “Subtitle Position” in Display Menu to “0”.

21

 

• Set “4:3 Aspect” in Display Menu to “Normal”.

 

Auto zoom function does not work

• Turn off television zoom function.

—

well.

• Use the other preset aspect ratios or manual adjustment.

22

 

• Zoom function may not work well, especially in dark scenes and may not work

—

 

depending on the type of disc.

 

When playing PAL disc, picture is

• Set “Transfer Mode” in Picture Menu to “Auto”.

21

distorted.

 

 

REFERENCE ENGLISH

RQTX0066

35

RQT8043

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operating Instructions SA-PT450 System SC-PT450 Main unitSafety precautions Table of contents Use AccessoriesPlease check and identify the supplied accessories Remote controlIf irregular coloring occurs on your television Placement of speakersSetup example For front, center and surround speakers Speaker installation optionsAttaching to a wall Fitting speaker stands not includedConnect to the speakers Simple setupConnect to the power supply Connect to the antenna Making the connectionsTelevision with Component Video in terminals Connect to the various television terminalsTelevision with an Hdmi terminal Television with a Video in terminalTo change these settings later Performing Quick SetupQuick Setup screen assists you to make necessary settings Details of settingsDiscs that cannot be played Disc informationDiscs that can be played Commercial discsMain unit Overview of controlsDVD DVD/CD EXT-IN AUX 31, Music P Remote controlDisc Basic play Using the remote controlShows a disc top menu ∞ Group skip Content skipThis feature does not work during program and random play \ Press 3, Play to resume playbackDisplaying current playback condition Advanced playPlaying data discs Playing data discs using navigation menusPlaying the programs Playing HighMAT discsPlaying the selected track in the CD Text disc Selecting from the listFunctions Menu Using on-screen menusPlay Menu Picture Menu Other SettingsDisplay Menu Audio MenuHdmi Information Confirming Hdmi informationOther Menu Hdmi Status Hdmi is connectedSelect the tab Changing the player settingsSetup menu DisplayHdmi tab Video tabAudio tab Display tab Changing the delay time of the speakersTo enter the speaker setting To finish the speaker settingNaming folders and files Disc handling precautionsTo clean discs Tips for making data discsDisc Operations English Automatic presetting Using the radioManual tuning Selecting the preset channelsEnhancing the surround sound effect Surround Enhancer Using sound effectsAdjusting the amount of bass Subwoofer level Enhancing the sound from the center speaker Center FocusPress Test again To output a test signalEnhancing the stereo sound Dolby Pro Logic This is one of the ways to get appropriate surround effectsTo select Music P AUX → Music P Operating other equipmentOptional antenna connection Optional connectionsUsing the Viera Link Hdavi ControlTM While pressing and holding Operating the televisionPress and hold for 2 seconds Specific operation undesirable or unexpected Troubleshooting guidePower Unresponsive or inoperable functionPicture abnormal or unviewable B repeatMenus Sound abnormal or improperListening to the radio Progressive videoUnit displays Television displaysGlossary Approx .8 W SpecificationsMm x 60 mm x 364.4 mm Approx .5 kgClean this unit with a soft, dry cloth Language code listMaintenance L0307LE1047
Top Page Image Contents