Set your surround free!
Optional Panasonic wireless accessory (example:
You can enjoy surround speaker sound wirelessly when you use the optional Panasonic wireless accessory (example:
For details, please refer to the operating instructions for the optional Panasonic wireless accessory.
Remove the digital transmitter cover before installing any optional Panasonic wireless accessory.
• Replace the cover when the digital transmitter is not in use.
Digital transmitter cover
PUSHPUSH
DIGITAL
PUSHPUSH
TRANSMITTER
Push!Push!
Rear panel of this main unit
You can use the blunt end of a writing instrument to push here until the cover pops out.
Speaker installation options
7Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
•The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k per screw. Consult a qualifi ed building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
1 Drive the screw (not included) into the wall | 2 Fit the speaker securely onto the screw(s) with the hole(s). | ||
| At least 30 mm | Center speaker | Front and surround speakers |
|
|
| |
Ø4.0 mm | Ø7.0 to 9.4 mm |
|
|
Wall or pillar | 4.0 to 6.0 mm | 190 mm |
|
|
|
|
7Fitting speaker stands (not included)
(For front, center and surround speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
•The stands must be able to support over 10 k.
•The stands must be stable even if the speakers are in a high position.
Example: Center speaker
Metal screw holes
For attaching to speaker stands
5 mm, pitch 0.8 mm |
|
Plate thickness plus |
|
7 mm to 10 mm | Speaker stand |
| |
60 mm | (not included) |
GETTING STARTED ENGLISH
RQTX0066
7
RQT8043