Panasonic TH-50PX500U manual PC Input Terminals Connection, Model Aspect 169 TH-42PX500U

Connection

PC Input Terminals Connection

	Less than
	10cm (4”)
COMPUTER	D-sub 15p
	Ferrite core
	(Small size gray color)
Conversion adapter (if necessary)	Stereo plug

RGB

PC cable

Less than

10cm (4”) Ferrite core

(Small size white color)

Audio

Connect a cable which matches the audio output terminal on the computer.

Notes:

(1)Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

(2)The maximum resolution:

Model		Aspect
	4:3		16:9
TH-42PX500U	768 ⋅ 768		1,024 ⋅ 768
TH-50PX500U	1,024 ⋅ 768		1,366 ⋅ 768

If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.

(3)Some PC models cannot be connected to the set.

(4)There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal.

(5)The computer shown in the illustration is for example purposes only.

(6)Additional equipment and cables shown are not supplied with this set.

Signal Names for D-sub 15P Connector

11 12 13 14 15

6 7 8 9 10

1 2 3 4 5

Pin Layout for PC Input Terminal

Pin No.

1

2

3

4

5

Signal Name

R

G

B

NC (not connected)

GND (Ground)

Pin No.	Signal Name	Pin No.	Signal Name
6	GND (Ground)	11	NC (not connected)
7	GND (Ground)	12	NC
8	GND (Ground)	13	HD/SYNC
9	NC (not connected)	14	VD
10	GND (Ground)	15	NC

14