
First time setup
Time
Valid when Mode is set to manual.
Auto program
CH
-VOL OK VOL+
CH
Press to select “Time”.
Press to adjust “Time”.
If the button is held, the speed of change increases.
Clock
Mode | Manual |
Date | 4 / 1 / 2005 |
Auto program is not available while the CableCARDTM is inserted.
You can scan All (Analog and Digital) channels. If needed, follow the menus and procedures displayed
You can also adjust the settings in Setup menu.
1 | Press to select “Auto program”. |
| |
| CH |
Time | 9 : 43 AM |
Time zone | EST |
DST | Off |
-VOL OK VOL+
CH
Press to display “Auto program” adjust screen.
First time setup
Language

Time zone
Valid when Mode is set to “Auto”.
Press to select “Time zone”.
CH
Press to select your zone.
2
CH
Clock
Auto program
Press to select “ANT In”.
|
|
|
| |
AST | EST | CST | MST | PST |
Press to select “Cable” or “Antenna”.
CH | NST | HST | AKST |
|
Clock |
|
|
|
|
|
|
|
|
|
Mode |
| Auto | ||
|
| |||
Date | 4 / 1 / 2005 | |||
Time |
| 9 : 43 AM | ||
Time zone |
| EST | ||
|
|
|
|
|
DST |
|
| Off |

Daylight saving
Valid when Mode is set to “Auto”.
Press to select “DST” (Daylight saving).
CH
Press to select “On” or “Off”.
Clock
CH |
|
|
Mode |
| Auto |
Date | 4 / 1 / 2005 | |
Time |
| 9 : 43 AM |
Time zone | EST | |
DST |
| Off |
CH
3
CH
-VOL OK VOL+
CH
4
CH
-VOL OK VOL+
CH
Auto program
ANT In | Cable |
Mode All
Start scan
Press to select “Mode”.
Press to select “All” or “Analog ”.
Auto program
ANT In | Cable |
Mode | All |
Start scan |
|
Press to select “Start scan”.
Press to start.
Channels available for reception will be set automatically.
Auto program
ANT In | Cable |
Mode | All |
Start scan |
|
Now scanning analog channel ...
Progress
•After Auto program is complete, the unit will return to Manual Program mode.
To make available a channel that has been located by auto scan, in the Manual program mode, move the cursor to “Apply” and pressOK key.
Press EXIT : To exit the menu screen
19