Panasonic TH-50PH11UK manual Screensaver For preventing image retention, Setup of Screensaver Time

SCREENSAVER (For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for any length of time.				SET UP		1/2
If the display must remain on, a SCREENSAVER should be used.				SIGNAL
1
				SCREENSAVER
	Press to display the SET UP menu.			COMPONENT/RGB-IN SELECT
						RGB
2	Press to select the SCREENSAVER.			INPUT LABEL		PC
				POWER SAVE		OFF
				STANDBY SAVE		OFF
				POWER MANAGEMENT		OFF
	Press to select the SCREENSAVER screen.			AUTO POWER OFF		OFF
				OSD LANGUAGE		ENGLISH (US)
				SCREENSAVER
3	FUNCTION selection			PRESENT TIME OF DAY 99:99
				START	SCROLLING BAR ONLY
	Press to select the FUNCTION.			FUNCTION
				MODE		OFF
	Press to select the desired function.			START TIME		6:15
				FINISH TIME		12:30
	NEGATIVE IMAGE	SCROLLING BAR ONLY		SIDE BAR ADJUST		BRIGHT
				WOBBLING		OFF
	WHITE SCREEN	OVERLAY SCROLLING BAR		PEAK LIMIT		OFF
	NEGATIVE IMAGE	: A negative image will be displayed on the screen.
	SCROLLING BAR ONLY : A white bar will scroll from left to right. The image won't be displayed.
	OVERLAY SCROLLING BAR : The brightness of the image will be decreased and a white bar will scroll on it.
	WHITE SCREEN	: The whole screen will be white.
4	MODE selection Note: OVERLAY SCROLLING BAR is not effective during two screen display.
	Press to select the	Off
	MODE.	INTERVAL	: Operates when SHOW DURATION and SAVER
	Press to select each
	mode items.		DURATION are set up and those times arrive.
		TIME OF DAY : Operates when START TIME and FINISH TIME are
			set up and those times arrive.
5	START setting	ON	: Operates when START is selected and the ACTION
			( ) button is pressed.
	When the MODE is set to ON, press to select START.

Press to start SCREENSAVER.

The menu screen will disappear and the SCREENSAVER will be activated. To stop the

SCREENSAVER under ON, press the R button or any buttons on the main unit.

Note: When the display is turned off, the SCREENSAVER will be deactivated.

Setup of SCREENSAVER Time

After selecting TIME OF DAY or INTERVAL, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)

Notes:

Press to select START TIME / FINISH TIME (When TIME OF DAY is selected).

Press to select SHOW DURATION / SAVER DURATION (When INTERVAL is selected).

Press to setup. button: Forward button: Back

SCREENSAVER
PRESENT TIME OF DAY		15:00
START	SCROLLING BAR ONLY
FUNCTION
MODE	TIME OF DAY
START TIME	6:15
FINISH TIME	12:30
SCREENSAVER
PRESENT TIME OF DAY		15:00

•Pressing “” or “” button once changes the Time 1 minute.

[However, switching occurs every 15 minutes when Periodic Time is selected.]

•Pressing “” or “” button continuously changes the Time by 15 minutes.

START
FUNCTION	SCROLLING BAR ONLY
MODE		INTERVAL
SHOW DURATION		12:00
SAVER DURATION		3:00

Note: Timer function will not work unless “PRESENT TIME OF DAY” is set.

28