Panasonic TH-42PH11UK Shipping condition, Press to select Time / Command, Press to set each item

Options Adjustments

6	Press to select Command No.	Command setting screen
	Press to select a command number.	Weekly Command Timer
			Program	1
		Command No
				02
		Time		10:30
		Command	IMS:SL1
7	Press to select Time / Command.	Weekly Command Timer
	Press to set each item.	Command No	Program	1
				02
	Time: Set the time to execute a command program.
		Time		10:30
	Pressing “ ” or “ ” button once changes “Time” 1	Command	IMS:SL1
	minute.
	Pressing “ ” or “ ” button continuously changes “Time” by 15 minutes.
	Command:Select a command to execute at the set time. This unit has 64 commands to set. (see
	page 47)

Notes:

•Command is performed in order of execution time, regardless of the command number.

•If a command execution time overlaps with that of other commands, these commands are performed in number order.

•Pressing , Time becomes --:-- and Command becomes ---.

Note:

Press to return to the previous screen.

Shipping condition

This function allows you to reset the unit to the factory setting.

1 Press to display the SET UP menu.

2 Press to select “OSD LANGUAGE”.

3	Press and hold till the SHIPPING menu is displayed.
4	Press to select “YES”.

Press to confirm.

[from the unit]

1Press the MENU button till the SET UP menu is displayed.

2Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.

3Press and hold the ENTER button till the SHIPPING menu is displayed.

4Press the Volume Up “+” or Down “–” button to select “YES”.

5Press the ENTER button and wait for 10 sec.

Note:

Press the R button to return to SET UP menu when SHIPPING menu is displayed.

SET UP 1/2

SIGNAL

SCREENSAVER

COMPONENT/RGB-IN SELECT

	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

SHIPPING YES

43