Digital Zoom
This displays an enlargement of the designated part of the displayed image.
1 Display the “Operation Guide”.
ZOOM
MOVE
Press to access Digital Zoom.
The “Operation Guide” will be displayed.
During Digital Zoom, only the following buttons can be operated.
EXIT |
1 |
[Remote control]
|
|
| INPUT |
| SURROUND |
| |
|
| VOL | |
N |
|
| R |
PICTURE | SOUND | SET UP | |
MULTI |
|
| ZOOM |
PIP | SWAP | SELECT | MOVE |
PICTURE |
|
|
|
POS. /SIZE |
|
| ASPECT |
PC |
| OFF TIMER |
SURROUND button | [Unit] |
MUTE button |
|
VOL button | INPUT MENU |
| |
| VOL button |
OFF TIMER button
2
3
4
Select the area of the image to be enlarged.
Press on the enlargement location to select.
The cursor will move.
EXIT |
2 |
Select the magnification required for the enlarged display.
Each time this is pressed, the magnification factor changes.
This is shown in the image being displayed.
⋅ 1 |
| ⋅ 2 |
| ⋅ 3 |
| ⋅ 4 |
|
|
|
|
|
|
|
Return to normal display (quit Digital Zoom).
R
Press to exit from the Digital Zoom.
Notes:
•When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.
•The Digital Zoom function cannot be selected while in the following operation state:
•While Digital Zoom is in operation, “Adjusting PICTURE POSITION/SIZE” cannot be used.
•The Digital Zoom capability is functional for the following component signals:
525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 750 (720) / 60p · 50p, 1250 (1080) / 50i
•The Digital Zoom capability is functional for the following composite signals:
NTSC, PAL, SECAM
25