Panasonic TH-37PG9U, TH-37PR9U, TH-42PG9U, TH-42PR9U manual Normalization, Menu & Enter

Options Adjustments

						Options		2/3
						Button lock		Off
						Remocon User level		Off
						ID select		0
						Remote ID		Off
						Serial ID		Off
Item	Effect				Adjustments
	Off	MENU&ENTER		On
	Off:	All the buttons at the bottom of the main unit can be used.
Button lock	MENU & ENTER:
		Locks and	buttons on bottom face of main unit.
		MENU	ENTER/
	On:	Locks all the button on bottom face of main unit.
	Off	User1	User2	User3
	Off:	You can use all of the buttons on the remote control.
Remocon	User1:You can only use			, , ,	, ,	, ,	buttons on the remote
	control.
User level

User2:You can only use , , buttons on the remote control.

User3:Locks all the buttons on remote control.

			Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
ID select			Set value range: 0 - 100
			(Standard value: 0)
Remote ID			Off:	Disables ID remote control functions. You can use normal remote control operations.
	Off	On	On:	Enable ID remote control functions.
Serial ID			Sets the panel ID Control.
	Off	On	Off:	Disables external control by the ID.
			On:	Enables the external control by the ID.
						Options	3/3
						Slot power	Off
						V. lnstallation	Off
						Rotate	Off
						Serial Slot Select	Slot1
Item	Effect				Adjustments
			Off	Auto	On
			Off:	Power is not transmitted to the slot power.
Slot Power			Auto: Power is transmitted to the slot power only when main power is on.
			On:	Power is transmitted to the slot power when main power is on or in the standby state.
			Note: In some cases, power is transmitted to the slot power when main power is on or in the standby
			state regardless of the slot power setting.
V.Installation	Off	On	Note: This mode is unavailable.
Rotate			Off:	Does not rotate the image.
	Off	On	On:	Rotates the image 180 degrees.
Serial Slot			Slot1	Slot2	Slot3
			Selects the slot which communicates serial.
Select
			Note: The setting of an external command can be set only from the fixed serial terminal (see page 11).

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the button on main unit together with button on the remote control and hold for more than 5 seconds. The “SHIPPING” menu is displayed and the lock is released when it disappears.

37