Panasonic PT-AE1000E Select MACRO1-6? and then press, Presstwice. ENTER, and then press Setup

Operating home theatre system devices with a single button press(operation macro function)

Using the operation macro function	Clearing the operation macro
	function
Note:	1 Press "SETUP" for 3 seconds or more.
If the distance between the remote control and the home
theatre equipment being operated is too far, or if the remote
control receivers of the home theatre system devices are
obstructed, the home theatre system devices may not work
correctly.
Check the locations and directions of the home theatre
system devices to make sure that they can all be operated.

1Press "DEVICE", use the tilt button to select "PJ" or "USER1-3", and then press "ENTER".

(Example: When "PJ" is selected)

(Example: When "USER1" is selected)

2

3

Use the tilt button to select "PJ", and then press "ENTER".

Press "ENTER".

Press the button which has the macro
2 recorded that you would like to use.	Press the top or bottom of the tilt button to
	4 select "MACRO1-6?" and then press
	"ENTER".

(Example: When "MC5" is selected)

The amount of time that will pass before the macro function is completed will vary depending on the number of keypresses which have been recorded.

5 Presstwice. "ENTER", and then press "SETUP"

Press twice.

ENGLISH - 11