Deleting home theatre equipment remote control signals
You can use one of two methods to delete remote control signals that have been learnt, either by deleting the settings one by one (DELETE) or by deleting all of the settings at once (OPS RESET).
Deleting settings for each button one by one (DELETE)
1Press "DEVICE", use the tilt button to select the device, and then press "ENTER".
Deleting settings all at once (OPS RESET)
1Press "DEVICE", use the tilt button to select the device, and then press "ENTER".
(Example: When “DVD” is selected) | (Example: When “DVD” is selected) |
2
3
4
Press "LEARN" for 3 seconds or more.
Use the tilt button to select "DELETE?", and then press "ENTER"
Press the button to be deleted.
Example: When deleting the signal | ( |
(learnt for the "PLAY" button. |
2
3
4
Press "LEARN" for 3 seconds or more.
Use the tilt button to select "OPS RESET?", and then press "ENTER".
Press "ENTER"
If "ERROR" is displayed
If no signals have been learned, "ERROR" will be displayed.
To delete another learnt signal, repeat step 4.
To finish, press "SETUP". | To finish, press "SETUP". |
ENGLISH - 9