Panasonic PT-AE1000E manual Editing displays on the LCD, Editing the device selection display

Page 14

Editing displays on the LCD

When remote control signals for a home theatre system device have been learnt for the USER 1-3 function buttons, you can change the "-A-, -B-, - C-" displays on the LCD to your preferred displays.

List of characters that can be displayed

List of characters that can be displayed Upper-case letters: A-Z Numerals: 0-9 Symbols: -, +, _, Q, ?, space

1Press "DEVICE", use the tilt button to select the device, and then press "ENTER"

(Example: When “DVD”is selected)

2Press "LEARN" for 3 seconds or more.

33 Press the top or bottom of the tilt button to select "KEY EDIT?" and then press

6Press "ENTER".

To finish, press "SETUP".

Editing the device selection display

You can remove the indicators for system devices that are not being used, to reduce the number of button operations required when selecting system devices.

1Press "SETUP" for 3 seconds or more.

2Use the tilt button to select "PJ", and then press "ENTER".

3Use the tilt button to select "SRC EDIT?", and then press "ENTER".

If "ERROR" is displayed

If no signals have been learned, "ERROR" will be displayed.

4Press the function button to be changed.

4Use the tilt button to select the display to be deleted, and then press "DEVICE".

(Example: When function B is selected)

Press the left or right sides of the tilt button

5 to move to the character to be changed, and press the top or bottom of the tilt button to select the character.

:Display position

:Character select

During setting, the space character will be displayed as “ ”.

To edit another character display, repeat steps 4 and 5.

When "DEVICE" is pressed, the indicator will flash more slowly.

To delete more than one indicator, repeat step 4.

5Press "ENTER" and then press "SETUP".

Restoring indicators that have been deleted.

In step 4 above, use the tilt button to select the indicator that you would like to display again, and then press "DEVICE".

14 - ENGLISH

Image 14

Contents Contents Names and functions of each part Projector function onlyOperation Quick Guide OperatinonSelecting and entering device codes Equipment code list Setting methodDeleting home theatre equipment remote control signals Setting remote control signals for home theatre systemsSetting remote control signals for home theatre systems Selecting and entering device codesTips on correct learning Select the device to be set and then -1press Press Setup for 3 seconds or moreReferring to the device code list Then press Enter Select the device to be set and then 3-1press Enter Turn the power on for the home theatrePress Default Deleting home theatre equipment remote control signals Deleting settings for each button one by one DeletePress Learn Setting the operation macro functionPress Setup twice Repeat stepPresstwice. ENTER, and then press Setup Select MACRO1-6? and then pressUsing the power supply macro function Configuration de la fonction macro dalimentationUsing the function buttons Desable ShutterEditing the device selection display Press Enter and then press SetupEditing displays on the LCD Appendices LCD display listRemote control function list