Panasonic NV-FJ720 specifications Option Setting, Tape Select

Page 13

Option Setting

1 Press the MENU button U to

On Screen Display

MENU

display the Main menu on the TV

LANGUAGE

screen.

CLOCK SET

CH ADD&DELETE

 

TUNER PRESET

 

G-CODE CH SET

 

SYSTEM

 

OPTION

 

SELECT :

 

, OK

 

END :MENU

2Press the Cursor buttons (34) S to select [OPTION] then press the

OK button T.

 

 

 

OPTION

 

 

 

TAPE SELECT

[AUTO]

 

 

NTSC INPUT SELECT [AUTO]

 

 

NTSC PB SELECT

[onPALTV]

 

 

JET NAVIGATOR

[OFF]

 

 

DELETE NAVIDATA

[NO]

3 Press the Cursor buttons (34) S

DIRECT REC

[OFF]

MONAURAL

[OFF]

 

 

AUDIO MIX

[OFF]

to select the desired field.

SELECT:

 

 

 

END :MENU

 

 

 

 

 

 

 

 

 

 

 

 

 

TAPE SELECT:

To select the corresponding

 

video cassette tape length to

 

display the approximaste

 

 

remaining tape time.

 

–Press the Cursor buttons (21) S to select the corresponding video cassette tape length.

AUTO: The VCR automatically distinguishes E30, -60, -90, -120, -180 and -240 tapes.

E195: For E195 tape

E260: For E260 tape

E300: For E300 tape

–The remaining tape time may not be displayed correctly depending on the tape used.

NTSC INPUT SELECT: To select the colour TV system used to record NTSC signals.

–Press the Cursor buttons (21) S to select [AUTO]. Allows NTSC [4.43] or [3.58] signals to be distinguished automatically.

–If the tape has not recorded correctly, select 4.43 or 3.58.

4.43: When recording NTSC 4.43 signals.

3.58: When recording NTSC 3.58 signals. Some programmes on NTSC 3.58 system cannot be recorded correctly at this position.

NTSC PB SELECT: To select the colour TV system of the TV used to play back a tape recording NTSC signals.

–Press the Cursor buttons (21) S to select the desired position according to the colour TV system of the TV.

on PAL TV: For TVs that can receive PAL signals.

4.43: For TVs that can receive NTSC 4.43 signals.

3.58: For TVs that can receive NTSC 3.58 signals.

JET NAVIGATOR:

To set to the conditions for the Jet

 

Navigator Function.

–Press the Cursor buttons (21) S to select [ON] or [OFF].

OFF:

Initially set at this position.

ON:

appears on the VCR display and Jet

 

Navigator function works.

 

 

DELETE NAVIDATA: To delete all the Jet Navigator data stored in the VCR’s memory.

–Press the Cursor buttons (21) S to select [OK] then press the OK button T to do the deletion.

NO:

Initially set at this position.

END:

It is done to delete all the Jet Navigator data.

 

 

DIRECT REC:

To set to the conditions for Direct

 

 

Recording Function.

–Press the Cursor buttons (21) S to select [ON] or [OFF].

OFF:

Initially set at this position.

ON:

This setting enables Direct Recording.

 

AV Input (A1) becomes exclusive channel for

 

Direct Recording.

 

(See page 17.)

 

 

AUDIO MIX:

To set the Audio mode to be used

 

 

during playback.

–Press the Cursor buttons (21) S to select [ON] or [OFF].

ON:

Both sound tracks (the Hi-Fi sound track and

 

the normal sound track) are played back mixed

 

together.

 

OFF:

Normally set at this position to reproduce the

 

better sound available from the Hi-Fi track.

 

 

MONAURAL:

To select the sound mode.

–Press the Cursor buttons (21) S to select [ON] or [OFF].

ON:

To record the normal sound during a NICAM

 

broadcast or if the stereo sound is distorted

 

due to inferior reception conditions.

OFF:

Normally set at this position.

 

 

4Press the MENU button U twice to exit the On Screen Display.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents NV-FJ720 Series ContentsLongrun Head System InformationP O N Controls and ComponentsTo Cancel the Child Lock Function Power button Numeric buttons\ Video in AV2 Audio in AV2 Connections Setting the Remote Control to Operate YourBasic Connections PreparationTo Change the RF output Channel Tuning the TV to Your VCRPress the Menu button U OperationsAuto Tuning Using the On Screen Display Plug in Auto TuningStoring TV Broadcasts in Your System VHF Catv UHFDirect Tuning Manual Tuning ProcedureFine Tuning Procedure Follow steps 1 to 3 of Manual Tuning ProcedureExample To Add and Delete the ChannelProgramme Channel Position Setting the Clock of Your VCR Language Setting of the On Screen DisplayTime Reset Function Preparations for G-Code Programming To Make Various Indicators Appear On Settings Using the On Screen DisplayTo Set the Colour TV System Screen DisplayTape Select Option SettingTo Change the Playback Speed PlaybackTo Locate Precisely the Desired Moment in a Scene To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi PlaybackTo Playback in the Desired Picture Quality Picture Mode To Stop Playback Automatically Playback Off Timer FunctionTo Eject Video Cassette Using the Remote Control Ntsc PlaybackRecording To Perform an OTR Recording To Perform Direct RecordingTo Stop the OTR Recording Before the End AV2 Audio in / Video in \ Recording from an external sourceRecording VCR HintKey Programming Timer RecordingDaily Timer Recording To Suspend the Timer Recording Standby ModeSetting other Programmes in Succession To Activate the Tape Speed Auto Change FunctionCancelling a Timer Programme Checking a Timer ProgrammeProgramme is COMPLETE. Remaining Code ProgrammingCategory Indication Icon To Set the CategoryTo Demonstrate the Jet Navigator Function When Recording Over the Same Location on a TapeTo Check the Recorded Programming Data Time Stamp Function To Cancel the Intro-Jet Scan or to Stop Playback To Cancel the Index Search or to Stop PlaybackOperation Audio Dubbing EditingAV2 Audio HintsInsert Editing Message of On Screen Display Before Requesting ServiceVCR will not operate correctly Playback will not operate correctlyDirt on the video heads Adjusting the Playback PictureNV-FJ720AM/AMJ/AMJT/BD/BDX SpecificationsVideo Audio
Top Page Image Contents