Panasonic NV-FJ720 specifications Manual Tuning Procedure, Direct Tuning, Fine Tuning Procedure

Manual Tuning Procedure

1Press the MENU button U to display the Main menu on the TV screen.

2Press the Cursor buttons (34) S to select [TUNER PRESET] then press OK button T.

3Press the Cursor buttons (34) S to select [CH] then select the channel number you want tuned by pressing the Cursor buttons (21) S.

4Confirm that [CLEAR] is set to [OFF].

5Press the Cursor buttons (34) S to select [AUDIO SYSTEM] then select the broadcasting system by pressing the Cursor buttons (21) S.

– BG:	PAL B.G.H/SECAM B.G
– I:	PAL I
– DK:	PAL D/SECAM D.K.K1

–M: NTSC (For NV-FJ720BD/BDX)

6Press the Cursor buttons (34) S to select [COLOUR SYSTEM] then select [AUTO] by pressing the Cursor buttons (21) S.

–The VCR automatically distinguishes between PAL, SECAM and NTSC broadcasts.

–If the picture lacks colour when [AUTO] is selected, select [MESECAM], [PAL] or [NTSC] (For NV-FJ720BD/ BDX).

7Press the Cursor buttons (34) S to select [SEARCH] then press the Cursor buttons (21)S to start the Manual Tuning.

–If the desired TV station has not been tuned, press the Cursor buttons (21) S again.

–Press the MENU button U and repeat steps 3 –7for each programme position you want to tune to a station.

On Screen Display

CH 2	SEARCH	CH 2	SEARCH 74
	END: MENU			END: MENU

8Press the MENU button U three times to exit the On Screen Display.

Direct Tuning

Follow steps 1 to 3 of Manual Tuning Procedure.

4Confirm that [CLEAR] is set to [OFF].

5Press the Cursor buttons (34) S to select [SEARCH].

6Press the Numeric buttons 2 to enter the number of the desired programme position.

–For other channels that require tuning, repeat steps 3–6.

7Press the MENU button U twice to exit the On Screen Display.

Fine Tuning Procedure

Follow steps 1 to 3 of Manual Tuning Procedure.

4Press the Cursor buttons (34) S to select [FINE] then press the Cursor buttons (21) S to obtain the best tuning condition.

–Press the OK button T to return the tuning to its former state.

5Press the MENU button U to exit the On Screen Display.

CH2		AFC: OK
FINE	:	END: MENU

Blanking of Unused Programme Positions

Follow steps 1 to 3 of Manual Tuning Procedure.

4Press the Cursor buttons (34) S to select [CLEAR] then press the Cursor buttons (21) S to select [ON].

–Repeat steps 3–4for other unused programme positions to skip during the selection of programme positions.

–To cancel the blanking of a programme position select that programme position then set [CLEAR] to [OFF].

5Press the MENU button U twice to exit the On Screen Display.

8