Warning and Important
Information
As this equipment gets hot during use, operate it in a well ventilated place; do not install this equipment in a confined space such as a book case or similar unit.
Important
Your attention is drawn to the fact that the recording of
Warning
To reduce the risk of fire or shock hazard, do not expose this equipment to rain or moisture.
For your safety
Do not remove outer cover.
Touching internal parts of the VCR is dangerous, and may seriously damage it.
To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.
Inserting Remote Control Batteries
Insert the batteries with the polarity (+ and
- +
+
Notes:
The service life of the batteries is approximately 1 year. However, it varies considerably depending on the frequency of use.
–When they are exhausted, replace them with two AA, UM3, or R6 size batteries.
–When the batteries are exhausted, remove them immediately and dispose of them correctly.
–Make sure that the batteries are inserted with the polarity (+ and
–Do not mix old battery with new battery.
–Do not mix different battery types, i.e. Alkaline and Manganese.
–Do not use rechargeable
–Do not heat or
–When you do not use the remote control for a long time, take out the batteries and store them in a cool, dry place.
Plug in Auto Tuning
Setting image illustration
AerialTV
Longrun Head System
This longrun head system enables approximately 8,000 hours of recording/playback with high quality images. Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects heads from dust and prevents head clogging.
Plus, [Alumina] Head Cleaner further enhanced cleaning efficiency.
–Based on
Cautions before you operate this VCR
Avoid:
–Humidity and dust.
–Covering the ventilation holes with soft materials such as cloth or paper.
–Extreme heat such as direct sunlight.
–Magnets or electromagnetic objects.
–Touching internal parts of the VCR.
–Water or some other liquid.
–Lightning. (Disconnect the aerial plug from the VCR during lightning storms.)
–Anything heavy on the VCR.
–Connecting or handling the equipment with wet hands.
–Using a cell phone near the VCR because doing so may cause noise to adversely affect the picture and sound.
Do:
–Wipe the VCR with a clean and dry cloth.
–Install the VCR in a horizontal position.
–Keep the VCR, TV and other equipment switched off until you have finished all connections.
Condensation may form in the following cases:
–The VCR is brought from cold surroundings into a
–The VCR is suddenly brought from cool surroundings, such as an
Note:
–In any of the
This VCR is not equipped with a dew sensor.
Press the POWER button 1 to switch the VCR from on the standby mode or vice versa. In the standby mode, the VCR us still connected to the mains.
1Connect the aerial cable.
On Screen Display
| AUTO TUNING |
|
2 Connect the | IN PROGRESS, |
|
PLEASE WAIT. |
| |
mains lead. | CH 22 SEARCH | 21 |
| END: MENU |
3Press the POWER button 1.
Plug in Auto Tuning is completed.
All broadcasting stations that can be received in the area are automatically tuned and stored in memory.
– Do not turn off the VCR halfway. (See page 7.)
2