To Stop Playback Automatically (Playback Off Timer Function)
If you set the playback duration, the playback will stop automatically.
After the set playback time has elapsed, the VCR automatically stops playback and switches off.
To Activate the Playback Off Timer Function:
During normal playback, press the Play button 7 on the VCR for more than 2 seconds to put the VCR in the Playback Off Timer mode.
After that, press the Play button 7 on the VCR repeatedly until the desired playback duration is displayed on the VCR display.
–Repeatedly pressing this button changes the indication in the following order:
Counter display | 30 | 60 | |
(normal playback mode) | (min.) | (min.) | |
240 | 180 | 120 | 90 |
(min.) | (min.) | (min.) | (min.) |
–The VCR will automatically switch off when
Notes:
–The
–When the tape reaches its end during
To Stop Midway:
Press the Stop button F.
NTSC Playback
Tapes recorded in the NTSC system can be played back with this VCR via a PAL system TV.
–Select [NTSC PB SELECT] from the on screen display according to the colour TV system of the TV.
(See page 13.)
–NTSC 3.58 recording requires [NTSC INPUT SELECT] to be in the AUTO or 3.58 position (see page 13), however if [NTSC INPUT SELECT] is in this position when recording a NTSC 3.58 signal, no colour is available for the PAL TV. Once the recording is completed, you then need to select [on PAL TV] to view the recording in colour on PAL TV.
–On some TVs, the playback picture may roll up or down; if your TV has
Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of tapes recorded by NTSC signals on a PAL system TV. The NTSC signal is not completely converted to a PAL signal. For this reason, images played back by this function cannot be recorded correctly on other VCRs.
To Playback in the Desired Picture Quality (Picture Mode)
This function reproduces optimum playback picture from various kind of recorded tapes and contents.
Press the PICTURE MODE button 5 and select the corresponding Picture Mode as follows.
Example:
Mode | Characteristic | Example for Purpose |
STANDARD | Normal | TV Programme recorded |
|
|
|
DYNAMIC | Clear & Vivid | Scenery, Sports |
|
|
|
SOFT | Mild | Rental soft tape |
|
|
|
CARTOON | Delicate | Cartoon |
|
|
|
–Pressing the PICTURE MODE button 5 once makes the On Screen Display appear; after that, pressing it repeatedly changes the indication in the following order:
STANDARD | DYNAMIC | |
(Initial Setting) | ||
|
CARTOONSOFT
Convenient Automatic Functions
VCR Auto Power On
When you insert a video cassette, the VCR switches on automatically.
Auto Playback Start
When you insert a video cassette with a broken erasure prevention tab, playback start automatically without having to press the Play button 7.
When the VCR is off, an inserted cassette can be played back by pressing the Play button 7.
Auto Rewind
When the tape reaches the end, the VCR automatically rewinds it to the beginning.
–This function does not work during timer recording and OTR.
Automatic Switching Off and Ejection
When the VCR is switched off, an inserted cassette can be ejected simply by pressing the EJECT button W. The VCR will eject the cassette and automatically turn itself off again.
VCR-off Search
When the VCR is off, the VCR starts
To Eject Video Cassette Using the Remote Control
Keep pressing the Stop button F for at least 3 seconds.
15