Remote Control, Power Source | Panasonic CT-2701 manual

REMOTE CONTROL

POWER

2CH

3	VOL	VOL	7
3
		CH
4	MUTE	TV/VIDEO	8
5
6	R-TUNE	RECALL	9
	R-TUNE	RECALL

Remote control

Part No. EUR7713020

1.POWER - Press to turn the TV on. Press again to turn the TV off.

2.ACTION - Press to display the On-screen menu function. And also, press to enter or select information for On-Screen operations.

3.VOL (VOLUME) / - Press to increase, or to decrease the volume level. And also, press to select the desired setting during On-Screen operations.

4.MUTE - To turn off the sound, press this button once. The TV will be silenced and the symbol "MUTE" will appear on

the screen. The muting feature can be released by pressing MUTE again or one of the VOL or .

5.Direct Channel Selection (0-9) - Allows direct access to any channel.

6.R-TUNE - This button allows you to go back to the previous channel selected by just pressing R-TUNE. Press this button again to return to the channel you were watching.

7.CH (CHANNEL) / - Press to change to a higher num-

bered channel set into memory. Press to change to a lower numbered channel set into memory. And also, press to select the desired setting during On-Screen operations.

8.TV/VIDEO - Switches between TV and external input.

9.RECALL - When you press this button, the channel number will appear in the upper right corner of the screen. Press the button again to remove display from the screen.

ENGLISH

Before using the remote control transmitter, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Slide the battery compartment cover.

2. Install two "AA" (penlight size) batteries.

3. Replace the battery compartment cover.

Use two "AA" size penlight batteries (supplied) for the transmitter. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.

(Follow battery manufacturer's directions.)

POWER SOURCE

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

AC outlet	NOTES:
Wider Hole	1.	Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).
and Blade		Use the attached power cord only.
	2.	If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file
		or cut the blade. It is the user's responsibility to have an electrician replace the obsolete
		outlet.
	3.	If you cause a static discharge when touching the unit, and the unit fails to function,
		simply unplug the unit from the AC outlet, wait a few minutes, and plug it back in.
		The unit should return to normal operation.

Polarized AC Cord Plug (One blade is wider than the other)