Selecting AUDIO OUTPUT
Select the digital output to be output from the optical digital audio output connector of the unit.
1 Press ACTION in Stop mode to display MAIN MENU.
2 | Press ▲▼◄► to select |
|
| MAIN MENU |
|
|
|
|
| ||
3 | “DVD.” | DVD |
| LOCK LANGUAGE | |
Press SET to display DVD | TV |
| CLOCK | CH | |
| MAIN MENU. | SELECT: |
| SET:SET | |
|
| END | :ACTION |
| |
DRC (Dynamic Range Compression)
OFF:
Normal audio range is selected. (Factory preset)
ON:
For dynamic sound even at low volume. This is useful for late- night listening. [Dolby Digital DVDs only].
Type of amplifier to be |
| Recommended setting |
|
|
|
| |
connected | LPCM | Dolby | dts |
| (DVD) | Digital | |
|
| ||
No amplifier is |
|
|
|
connected |
|
|
|
AV amplifier without |
|
|
|
4 Press ▲▼ to select “AUDIO OUTPUT.”
5 Press SET to display AUDIO OUTPUT screen.
6 Press ▲▼ to select an item.
7 Press SET repeatedly for desired output.
LPCM (DVD)
|
|
|
|
|
| DVD | MAIN MENU |
| DISC | LANGUAGES | |
| AUDIO | OUTPUT | |
| STILL | MODE | :AUTO |
| TV MODE | :4:3 Pan&Scan | |
|
|
| |
| SELECT | : ▲ ▼ | |
| SET |
| :SET |
| END |
| :ACTION |
|
|
|
|
|
|
|
|
| AUDIO | OUTPUT | |
|
|
|
|
| LPCM(DVD) |
| :OFF |
| Dolby Digital | :Bitstream | |
| dts |
| :Bitstream |
| DRC |
| :OFF |
|
|
|
|
| SELECT | : ▲ | ▼ |
| SET | :SET | |
| END | :ACTION | |
|
|
|
|
Dolby Digital/dts | PCM | PCM*1 | PCM*1 |
decoder |
|
|
|
|
|
|
|
AV amplifier including | PCM | Bitstream*3 | PCM |
Dolby Digital decoder |
|
|
|
|
|
|
|
AV amplifier including |
|
|
|
Dolby Digital/dts | PCM | Bitstream*3 | Bitstream*2 |
decoder |
|
|
|
*1 When connecting an amplifier (with an optical digital input connector) which does not contain the Dolby Digital or dts decoder, be sure to select “PCM.” If “Bitstream” is selected, starting DVD play may cause such a high level of noise as to be harmful to your ears and damage the speakers.
*2 When a dts decoder is connected, please select “Bitstream” in “dts.” If “PCM” is selected, there will be stereo sound.
*3 When a Dolby Digital decoder is connected, please select “Bitstream”
OFF:
Linear PCM of less than 48 kHz/16 bit is output. When playing DVDs recorded in linear PCM of over 48 kHz/20 bit, no digital audio is output. (Factory preset)
PCM:
When playing DVDs recorded in linear PCM of 48 kHz/20 bit/24 bit or more, digital audio converted to 44.1 kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.)
Dolby Digital
Bitstream:
Dolby Digital bitstream
PCM:
When you have connected an amplifier that doesn’t have a built- in Dolby Digital decoder.
dts selection
Bitstream:
dts bitstream is output. (Factory preset)
PCM:
When you have connected an amplifier that doesn’t have a built- in dts decoder.
in “Dolby Digital.” If “PCM” is selected, there will be stereo sound.
Note:
•Make settings according to amplifier connected to optical audio output as shown in above table.
8 Press ACTION to redisplay DVD MAIN MENU and go to step 4 to set up another item. Or, press ACTION three times to exit.
50 |
|
For assistance, please call : |