LOREX Technology L15LD400 instruction manual RS232C Setup, USB Backup Submenu

BACKUP

RS232C SETUP

Users can connect the System to a PC through the RS232 port. Other system control devices can also be connected through the RS232 port. The ASCII-Code information is in Serial port setup (Users cannot change value in this setting).

1.BAUDRATE - The transmission baudrate is 19200bps.

2.LENGTH - The transmission length is 8 bits.

3.STOP BIT - The stop bit is 1.

4.PARITY - The parity is none.

BACKUP

USB BACKUP SUBMENU

1.HDD - Indicates the start and the end recording date and time on the Hard Drive.

2.USB - Select a starting date and time for backup. Use Mouse wheel to change the value, then select the SIZE to choose a backup size.

3.SIZE - Insert the USB device, and the system will automatically check the disk size and display the available space onscreen. Use Mouse wheel to change the value. The system will automatically calculate the end date and time for backup.

4.BACK-UP- Move the cursor to BACK-UP and Click it to begin the backup process. The System will save the file in AJP format. Users have to install the LorexPlayer 2.0 Backup Software to playback the file. Please refer to the provided Software Guide for further details.

44