About the Speaker Setup, About the Digital Setup

HOME DVD PLAYER

V10M10_IM_EN_08072006

GETTING STARTED

About the Video Setup – Continued

4.SATURATION: Used to adjust the color saturation of a movie

5.SHARPNESS: Used to adjust the sharpness of a movie

6.EXIT SETUP: Used to exit the setup menu.

About the Speaker Setup

The speaker setup menu is composed of the following setup options: DOWNMIX, SUBWOOFER, CENTER DELAY, REAR DELAY, and BASS MODE.

1.DOWNMIX: Used to set the sound characteristics based on the audio connection, which you made while installing this unit.

a.LT / RT: Select this option if you made the 2-channel audio connection.

b.STEREO: Select this option if you made the 2-channel audio connection, especially to a TV set.

c.VSS: Select this option if you made the 2-channel audio connection but want to listen to the soundtrack effects, down-mixed from the 5.1-channel surround sound, from the stereo audio speakers. The term “VSS” is short for “Virtual Surround Sound”.

d.5.1 CH: Select this option if you made the 5.1-channel audio connection.

2.SUBWOOFER: Used to turn on or off the sound channel for the subwoofer. If this unit is connected to a subwoofer, you can set this option on to enhance the bass sound.

24	www.jWIN.com

HOME DVD PLAYER

V10M10_IM_EN_08072006

GETTING STARTED

About the Speaker Setup – Continued

3.CENTER DELAY: Used to adjust the time delay of the sound output for the center speaker.

4.REAR DELAY: Used to adjust the time delay of the sound output for the rear speakers.

5.BASS MODE: Used to adjust the bass sound level by the installed speaker types and their arrangement.

a.ALL LG SPK: Select this option if all speakers are large.

b.ALL SM SPK: Select this option if all speakers are small.

c.MIXED SPK: Select this option if the installed speakers are mixed with the large and small sizes of speakers.

6.EXIT SETUP: Used to exit the setup menu.

About the Digital Setup

The digital setup menu is composed of the following setup options: OP MODE, DYNAMIC RANGE, and DUAL MONO.

1.OP MODE: Used to change the audio output level.

a.LINE OUT: Select this option to output the audio as a line-level sound signal. If the connected audio device has the direct AV input, it is better to select this option.

b.RF REMOD: Select this option to output the audio sound with the higher sound level. This option is more suitable to

connect this unit to a TV set, which doesn’t have a direct AV input, in order to increase the sound level.

25	www.jWIN.com