Jwin JD-VD509 About the Audio Outputs, Connecting to a TV Set with 2-Channel Audio Input, Video

HOME DVD PLAYER V10M10_IM_EN_08072006

GETTING STARTED

About the Audio Outputs

This unit supports the three-way audio connection: 2-channel (stereo) audio connection, 5.1- channel surround audio connection, and digital coaxial audio connection. If you plan to connect this unit directly to your 2-channel audio or video device, you only need to connect the audio cable to the FL (Front Left) and FR (Front Right) audio output jacks on the back of this unit. If you have a home speaker system supporting the 5.1-channel surround sound or coaxial digital audio input, you need to use all the 5.1-channel audio jacks or the coaxial digital audio output. Please note that the 5.1-channel audio cables and the coaxial digital audio cable are not included in the package.

Analog Audio Outputs		Digital Audio Output
•	For the 2-channel audio output, two	This unit supports the digital audio
	connectors, FL and FR, are used only.	output to the external audio
•	For the 5.1-channel audio output, all	system through the coaxial audio
	connectors are used.	cable.

HOME DVD PLAYER V10M10_IM_EN_08072006

GETTING STARTED

Connecting to a TV Set with 2-Channel Audio Input

See the notes below for the video connection.

VIDEO IN

Y

Pr

VIDEO IN

Pb

S-VIDEO

VIDEO

Composite Video and S-VIDEO Outputs

•The composite VIDEO output is just good enough to watch a movie on the small TV sets.

•The S-VIDEO (Separate Video) output gives you better video quality than the composite video output.

Component Video Output

The component video output (Y / Pr / Pb) gives you the best video quality, comparing to the video quality of the S-VIDEO and the composite VIDEO outputs.

AUDIO IN

R

L

About the Video Outputs

This unit also supports the three-way video connection: composite VIDEO connection, S- VIDEO connection, and component VIDEO connection. The component video output gives you the best video quality among three connections. The S-VIDEO output gives you the better video quality than the composite video output. The composite video output gives you the good video quality just enough to watch your movie on the small TV sets. Thus, it is not necessary to make all the video connections. Just choose and make one of the video connections available on your TV or display device. Please note that the S-VIDEO and component VIDEO cables are not included in the package.

Notes on the Connection Diagram

1.You don’t need to connect all the video outputs even though your TV set supports all the connections. Choose and make the most appropriate video connection available on your TV. The S-VIDEO and the component VIDEO cables aren’t included in the package.

2.The component VIDEO output is labeled as Y, Pr (or Cr), and Pb (or Cb), and these three component video output jacks must be all and properly connected to properly display the picture in the component video mode of your TV set.

14 www.jWIN.com 15 www.jWIN.com