Jwin JD-VD509 No picture or no sound, Picture but no sound, Sound but no picture, Connectivity

Page 19

HOME DVD PLAYER

V10M10_IM_EN_08072006

TROUBLESHOOTING GUIDE

No picture or no sound

Ensure whether the [POWER] button on the front panel is on.

Ensure whether the power cord is connected properly.

Ensure the power outlet is working.

Picture but no sound

Ensure the audio jacks are securely connected.

Ensure the volume is turned up to the proper level.

Ensure you have set the AUDIO settings correctly.

Ensure you have connected the audio cable properly.

Ensure the audio is not set to mute.

Sound but no picture

Ensure the video jacks are securely connected.

Ensure you have connected the video cable properly.

Ensure you have set the VIDEO settings correctly.

Poor picture or poor sound

Ensure you have set the AUDIO and VIDEO settings correctly.

Ensure the disc is not scratched or stained.

The “Bad Disc” indication is displayed.

Ensure the disc is not warped, damaged or deformed.

Ensure the disc is not badly stained or damaged.

Ensure the disc format is compatible with the player.

The remote control isn’t working.

Make sure the [POWER] button on the main unit is set on.

Point the remote control directly at the remote control sensor on the main unit.

Remove any obstacles between the remote control and the remote control sensor.

Change the remote control batteries.

The “No Disc” indication is displayed.

Ensure you have loaded a disc.

Ensure the disc is not upside down.

Ensure the disc isn’t distorted, stained or scratched.

The main unit is not working.

Power off the main unit and turn it on again.

36

www.jWIN.com

HOME DVD PLAYER

V10M10_IM_EN_08072006

SPECIFICATIONS

General Specifications

Power Requirements: AC: 100V-240V, 60Hz/50Hz

Power Consumption: 15W

Signal System: NTSC / PAL

Frequency Response: 20Hz – 20kHz

S/N Ratio: < 90dB

Total Harmonic Distortion: < 0.0025%

Unit Weight: 1.93kg (4.3 lbs)

Connectivity

Video

oComposite Video Output

oS-VIDEO Output

oComponent Video Output (Y, Pb, Pr)

Audio

o5.1-Channel Audio Output (can be used as 2-Channel Audio Output)

oCoaxial Digital Audio Output

oMicrophone Jacks x 2

*Specifications and features are subject to change without the prior notice. The weight and dimensions are approximate.

37

www.jWIN.com

Image 19
Contents Home DVD Player For Rechargeable Battery User Safety GuideCleaning Laser SafetyImportant Safety Instructions Table of Contents Progressive-Scan DVD Player with 5.1Channel Audio Output Getting StartedBox Front Panel Location of Controls on the Remote ControlLocation of Controls on the Main Unit Location of Indications on the VFD ScreenBrief Instructions on Installing the DVD Player Installing the Remote Control BatteriesSpecial Notes Video Connecting to a TV Set with 2-Channel Audio InputAbout the Audio Outputs About the Video OutputsDigital Audio Amplifier Connecting to an Audio Amplifier with Digital Audio Input1CH Audio Inputs About the System Setup Navigating the Setup MenuPreparing the Unit and Attached Devices About the Language Setup About the Video Setup About the Audio SetupAbout the Digital Setup About the Speaker SetupStandby Button Return Button WW ButtonTitle Button Button Operating with a Remote ControlLanguage Button Subtitle ButtonProg Button Setup ButtonGoto Button Random ButtonAbout Kodak Picture CDs Advanced FeaturesUsing the Microphones Playing MP3 CDsPicture but no sound Remote control isn’t workingGeneral Specifications No picture or no soundTEL FAX