LOREX Technology SC325000 instruction manual Alarm Set, Alarm 1UU

Page 22

Alarm Set

Alarm Set

This submenu allows you to set the Alarm (based on Sensor or Motion input). When a Sensor event or Motion is detected, an Alarm EVENT will be triggered and an indicator will be displayed on the top left side of the monitor screen (see the QUAD screen diagram on the bottom of page 29).

1.DURATION - Sets the length of time an ALARM message is displayed on the monitor. Navigate to

this option using the buttons, and press the button to change the option to one of the following settings: 5 SEC / 10 SEC / 15 SEC / 20 SEC / 25

SEC / 30 SEC or CONT (Continuous Alarm).

2. CHANNEL1 - CHANNEL4 - Sets the Channel to ON/OFF for Alarm detection. Navigate to this

option using the buttons, and press the button to change the option.

When an ALARM is detected, an indicator appears at the top LEFT corner of the monitor screen. For example:

ALARM [ 1UU- ]

This indicates that Channel 1 is in ALARM, and the U displayed on Channels 2 and 3 indicate that these channels are set to NO (no ALARM). The - on channel 4 means that this channel is not currently in ALARM mode.

	ALARM
	DURATION	[ 5 SEC ]
	CHANNEL1	[ YES]
	CHANNEL2	[ NO ]
	CHANNEL3	[ NO ]
	CHANNEL4	[ YES ]
[	]MOVE [	]SELECT []EXIT

22

Image 22

Contents Channel Networkable Digital Video Recorder Page Important Safeguards InstallationService General Precautions Sentinel CctvDVR Features NetViewer SoftwareTable of Contents Table of Contents Getting Started Hard Drive not Included Power Supply 12V 5ARemote Control with Batteries Channel Networkable DVRSC325000 Front Primary Function Buttons Channel Buttons SC325000 Back Remote Control QUAD/ENTER Change toInstalling the Hard Drive Positioning Reinsert the Cartridge Casing into the DVR Secure the Hard Drive in the CasingHard Drive UnlockedSystem Start Starting the DVR Self Test ScreensHard Drive Detection Starting the DVR Quad Display Indicates Slave Hard DriveMain Menu Control Date Format Display the Date Format on Time / Date SetMenu TIME/DATE Schedule Set Sensor Set Motion SetAlarm Set Alarm 1UURecord Set Only ONE Channel of Audio can be Recorded AT a TimeAdvanced Menu Set PasswordDefault Load Y/N Advanced MenuSystem Information System InformationNetwork Network Recording Functions Menu Settings Recording On screen MessagesSearch Functions Event Search Total Event Master HDD Event noSearch Functions Time Search Playback FunctionsPTZ Pan/Tilt/Zoom Control Processor NetViewer Installation RequirementsMinimum System Requirements Operating System MemoryDVR Internet Router Network ConnectivityNot Included Internet Router Computer Router Port ForwardingNetwork Example DVRRouter Port Forwarding DVR Specifications Appendix #1 Ntsc / PALConnecting Cameras to the DVR Appendix #2 DVR BNC CamerasConnecting a Slave Monitor Appendix #3 DVR Slave MonitorConnecting to an Observation System Appendix #4 Observation System DVRConnecting Alarm Device Appendix #5 DVR SensorTroubleshooting ProblemTroubleshooting It’s all on the web