LOREX Technology SC325000 instruction manual Important Safeguards, Installation

Page 3

Important Safeguards

Important Safeguards

In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product.

Installation

1.Read and Follow Instructions - All the safety and operating instructions should be read before the video product is operated. Follow all operating instructions.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - Comply with all warnings on the video product and in the operating instructions.

4.Polarization - Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet

5. .Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your video dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.

6.Overloading - Do not overload wall outlets of extension cords as this can result in the risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced by your service technician.

7.Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the video product.

8.Ventilation - Slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video equipment on a bed, sofa, rug, or other similar surface. This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the video product manufacturer’s instructions have been followed.

9.Attachments - Do not use attachments unless recommended by the video product manufacturer as they may cause a hazard.

10.Water and Moisture - Do not use this video product near water. For example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, near a swimming pool and the like.

Caution: Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should bear the UL listing mark of CSA certification mark on the accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel.

11.Accessories - Do not place this video equipment on an unstable cart, stand, tripod, or table. The video equipment may fall, causing serious

damage to the video product. Use this video product only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer or sold with the video product. Any mounting of the product should follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer.

iii

Image 3
Contents Channel Networkable Digital Video Recorder Page Installation Important SafeguardsService Sentinel Cctv General PrecautionsNetViewer Software DVR FeaturesTable of Contents Table of Contents Channel Networkable DVR Hard Drive not Included Power Supply 12V 5ARemote Control with Batteries Getting StartedSC325000 Front Primary Function Buttons Channel Buttons SC325000 Back QUAD/ENTER Change to Remote ControlInstalling the Hard Drive Unlocked Secure the Hard Drive in the CasingHard Drive Positioning Reinsert the Cartridge Casing into the DVRStarting the DVR Self Test Screens System StartHard Drive Detection Indicates Slave Hard Drive Starting the DVR Quad DisplayMain Menu Control Time / Date Set Date Format Display the Date Format onMenu TIME/DATE Schedule Set Motion Set Sensor SetAlarm 1UU Alarm SetOnly ONE Channel of Audio can be Recorded AT a Time Record SetAdvanced Menu PasswordDefault Load Y/N Advanced Menu SetSystem Information System InformationNetwork Network Recording Functions Recording On screen Messages Menu SettingsTotal Event Master HDD Event no Search Functions Event SearchPlayback Functions Search Functions Time SearchPTZ Pan/Tilt/Zoom Control Memory NetViewer Installation RequirementsMinimum System Requirements Operating System ProcessorNetwork Connectivity DVR Internet RouterNot Included DVR Router Port ForwardingNetwork Example Internet Router ComputerRouter Port Forwarding Ntsc / PAL DVR Specifications Appendix #1DVR BNC Cameras Connecting Cameras to the DVR Appendix #2DVR Slave Monitor Connecting a Slave Monitor Appendix #3Observation System DVR Connecting to an Observation System Appendix #4DVR Sensor Connecting Alarm Device Appendix #5Problem TroubleshootingTroubleshooting It’s all on the web