Voice Setup
Overwrite Setup
Allows the DVR to overwrite previously recorded data, or to stop the recording once the hard drive is full.
Overwrite Setup
Overwrite: ON
Warning Signal: OFF
Warning Duration: 10 Sec
1.OVERWRITE: Allows the Hard Drive data to be overwritten once the drive becomes full. Press the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.
NOTE: If Overwrite is set to OFF, recording will stop once the drive is full.
2.WARNING SIGNAL: Turns the Hard Drive Overwrite Warning to ON/OFF. Press the K and L buttons to highlight, and press the ENTER button to change the setting. If set to ON, a warning signal will sound once the drive reaches 95% capacity (for the length of time set in the Warning Duration)
3.WARNING DURATION: Sets the duration for the Warning Alarm to be active. Press the K and L buttons to highlight, and press the ENTER button
Voice Setup
Voice Setup |
| Voice Record: OFF |
| ||
|
| Voice Replay: ON |
|
| Voice Channel: 1 CH |
|
| Voice Volume: 8 |
1.VOICE RECORD: Allows Voice (sound) to be recorded to the Hard Drive. Press the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.
2.VOICE REPLAY: Allows previously Recorded Voice (sound) to be played back on the DVR. Press the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.
3.VOICE CHANNEL: Sets the channel for Voice Recording. Press the K and L buttons to highlight, and press the + and - buttons set to CH1, CH2, CH3, CH4 or QUAD.
4.VOICE VOLUME: Sets the Volume level for the DVR unit. Press the K and L buttons to highlight, and press the + and - buttons to change the volume setting to 1 (low) to 10 (high), or mute.
29