LOREX Technology L3104 instruction manual Network Connectivity, Not Included

Network Connectivity

Network Connectivity

The DVR unit can be controlled using your existing network and a PC. Control of the unit can occur from within your local network, or remotely over the Internet.

1.Enable PORT FORWARDING on your Router. Refer to the instructions on Page 40 for details.

2.Set up a web account at http:// DDNS.strategicvista.net. Refer to Pages 41-42 for setup and configuration instructions.

3.Connect the DVR to the Router Power the Observation unit on.

NOTE: It is recommended that the DVR be connected to the router prior to powering on the system.

The DVR can be automatically assigned an IP address by the router (and other network related settings), or an IP address can be manually assigned within the MENU - NETWORK setup on Page 43.

4.Access the DVR Software with either a Local PC or Remote PC using Microsoft Internet Explorer 5 (or higher). See Pages # for details.

INTERNET

DVR

ROUTER

(Not Included)

PC

(Not Included)

39