Record Setup
Record Setup
Changing Quality settings will generate different file sizes - a lower quality setting will result in a smaller the image, however the quality of the images will be reduced. See Page 55 for the Recording Details Chart.
Alarm Record Setup
Alarm Record Setup
CH1 Alarm Record Setup
CH2 Alarm Record Setup
CH3 Alarm Record Setup
CH4 Alarm Record Setup
Pre Alarm: OFF
Post Alarm: OFF
Alarm Record: OFF
Color: Color
Record Quality: High
IDSM Sensitivity: High
Record Speed: 30 FPS
1.CH1 - CH4 ALARM RECORD SETUP: Setup for Motion Detection on individual cameras. Press the K and L buttons to highlight, and press the ENTER button to access the individual settings for each camera:
•Alarm Record: Sets Alarm recording ON/OFF. Press the K and L buttons to highlight, and press the + and - buttons to change the setting.
•Color: Sets the Color recording type to Color or B/W. Press the K and L buttons to highlight, and press the + and - buttons to change the setting.
•Record Quality: Sets the Recording Quality. Press the K and L buttons to highlight, and press the + and - buttons to change the setting to Low, Standard, High or Best.
•IDSM (Image Difference Store Method) Sensitivity: Sets the IDSM Sensitivity. Press the K and L buttons to highlight, and press the + and - buttons to change the setting to Low, Standard or High.
•Record Speed: Sets the Recording Speed. Press the K and L buttons to highlight, and press the + and - buttons to change the setting to 0.1, 0.2, 0.5, 1, 2, 4, 8, 16 or 30 FPS.
2.PRE ALARM: Turns the recording ON or OFF previous to the alarm event (data recovered from the DVR Buffer).
3.POST ALARM:.Turns the recording ON or OFF after the alarm event (data recovered from the DVR Buffer).
Motion Record Setup
Motion Record Setup
CH1 Motion Record Setup
CH2 Motion Record Setup
CH3 Motion Record Setup
CH4 Motion Record Setup
Motion Hold: 10 Sec
Motion Sensitivity: OFF
Color: Color
Record Quality: High
Record Speed: 30 FPS
26